Table of Contents
Advertisement
Appendix H: Obtaining a list of
RDB variables
The RDB is a database of variables that contain settings on the router. You can retrieve (get) and set the values of these variables
through the command-line or via SMS Diagnostics. To access a full list of the RDB variables, follow these steps:
1.
Log in to the web user interface as described in the
2.
Click the System menu at the top of the screen, then select the Administration menu on the left. Finally, select the
Administration settings menu item.
3.
Click the Enable Telnet toggle key so that it is in the ON position.
4.
Under the Telnet/SSH account section, enter a telnet password and then re-enter it in the Confirm password field.
5.
Click the Save button at the bottom of the screen.
6.
Open a terminal client such as PuTTY and telnet to the router using its IP address.
7.
At the login prompt, type root and press Enter. At the password prompt, enter the password that you configured in step
4.
8.
At the root prompt, enter the command rdb dump | more . This will display a list of every rdb variable on the router one
page at a time.
Note: Omitting the | more parameter will dump a complete list without pagination. For easier access, some terminal clients
such as PuTTY have the ability to log all telnet output to a text file.
NetComm Wireless 3G M2M Router / Plus
144
Advanced configuration
section of this guide.
www.netcommwireless.com
Advertisement
Table of Contents
