Ricoh 917F Operating Instructions Manual page 1750

4. Troubleshooting When Using the Printer Function
Problem
Image position differs from
the display.
4
The printed image is different
from the image on the
computer display.
Print is slanted.
Print is slanted.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
72
Cause
The correct page layout
settings are not made.
With certain functions, such
as enlargement and
reduction, image layout
might be different to that on
the computer display.
The paper is feeding in at a
slant.
The machine's cover is open. Make sure the right and lower right
The number of sheets loaded
exceeds the capacity of the
machine.
The paper is damp.
The paper is too thick or too
thin.
Solution
• PCL 5e
On the printer driver's [Paper] tab,
select [Print On] box, and then
select the desired size.
• PCL 6 / PostScript 3
On the printer driver's [Detailed
Settings] tab, select [Print On:] box
on the [Basic], and then select the
desired size.
In the application, change the layout,
character size, and character settings.
Load the paper correctly. See "Loading
Paper", About This Machine
covers are properly closed.
Load paper only as high as the upper
limit markings on the side fences of the
paper tray or bypass tray.
Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine
Use recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine
.
.
.