Display; Home Screen - Sharp MX-C300P Operation Manual

Digital full color printer
Hide thumbs Also See for MX-C300P:
Table of Contents

Advertisement

DISPLAY

This section explains how to use the display.

HOME SCREEN

The machine is set at the factory to return the display to the home screen one minute after a print job is finished or
when the [HOME] key (
In the default state the display shown below appears. The default state of the display may vary depending on
settings in the system settings.
Note
The auto clear time can be changed in the system settings. (p.91)
(1)
Message display
Messages are displayed regarding machine
status and operation.
(2)
Paper size display
The size of paper loaded in each tray is
displayed.
(3)
Connection status display
(Models with the wireless LAN function only)
Displayed when wireless LAN is on.
Wireless infrastructure mode:
Connecting
Wireless infrastructure mode:
Not connected
Wired + wireless access point mode
Connection failure of wireless LAN
device inside machine
) is pressed (auto clear function).
(1)
(2)
(3)
(4)
(4)
Toner level display
The remaining amount of each color of toner is
displayed.
76 to 100%
51 to 75%
26 to 50%
1 to 25%
0%
10
BEFORE USING THE MACHINE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-c300pl

Table of Contents