Wireless (Access Point - Sharp MX-C300P Operation Manual

Digital full color printer
Hide thumbs

Advertisement

Table of Contents
Wireless (Infrastructure)
(Only on models with wireless LAN)
This sets connection using wireless infrastructure
mode.
Manual Input of SSID
Enter up to 32 half-width characters for the SSID.
Security Type
Select the security type.
(none/WEP/WPA Personal/WPA2 Personal)
Setting of Encrypt
Select the encryption method based on the "Setting of
Security Type" setting.
(none/WEP/TKIP/AES)
Security Key Settings
Set the security key used for wireless connection.
WEP
5 half-width numeric digits,
10 hexadecimal (64 bit) digits,
13 half-width numeric digits,
or 26 hexadecimal (128 bit) digits
WPA
8 to 63 half-width numeric digits or
Personal
64 hexadecimal digits
WPA2
Personal

Wireless (Access Point)

(Only on models with wireless LAN)
This sets connection using wireless access point
mode.
Setting of SSID
Enter up to 32 half-width characters for the SSID.
Security Settings
• Security Type
Select the security type.
(none/WEP/WPA Personal/WPA2 Personal)
• Setting of Encrypt
Select the encryption method based on the
"Setting of Security Type" setting.
(none/WEP/TKIP/AES)
• Security Key Settings
Set the security key used for wireless connection.
WEP
5 half-width numeric digits,
10 hexadecimal (64 bit) digits,
13 half-width numeric digits,
or 26 hexadecimal (128 bit) digits
WPA
8 to 63 half-width numeric digits or
Personal
64 hexadecimal digits
WPA2
Personal
Device IP Address Settings
Set the IP address of the access point.
Channel Settings
Set the channel used for the access point.
Sending Output Settings
Set the transmission output of the access point.
Bandwidth Settings
Set the frequency band of the access point.
IP Addr. Distribution Range
Set the lease range and lease period of the IP address
used for the access point.
89
SYSTEM SETTINGS

Advertisement

Table of Contents
loading

  Also See for Sharp MX-C300P

This manual is also suitable for:

Mx-c300plMx-c300pe