Troubleshooting; Network Problems; Printing Problems; The Machine Does Not Connect To The Network - Sharp MX-C300P Operation Manual

Digital full color printer
Hide thumbs Also See for MX-C300P:
Table of Contents

Advertisement

TROUBLESHOOTING

NETWORK PROBLEMS

Problem
The machine does not connect to
the network.

PRINTING PROBLEMS

In addition to this section, troubleshooting information can also be found in the README files for each of the
software programs. To view a README file, see "SOFTWARE SETUP GUIDE".
Problem

The machine does not operate.

Cause and solution
The LAN cable is disconnected.
→ Make sure that he LAN cable is firmly inserted in the connectors
on the machine and your computer. To connect the cable, see the
"Software setup guide".
Is the machine configured for use on the same network as
the computer?
→ The machine cannot be used if it is not connected to the same
network as the computer, or if it is not configured for use on the
network.
For more information, consult your network administrator.
Cause and solution
The machine is not plugged into a power outlet.
→ Plug the machine into a grounded outlet.
Power switch OFF.
→ Turn the power switch ON.
The machine is warming up.
→ The machine requires some time to warm up after the power
switch is turned on. While the machine is warming up, settings
can be performed but printing is not possible.
The front cover or the side cover is not completely closed.
→ Close the front cover or the side cover.
The machine is in auto power shut-off mode.
→ When auto power shut-off mode has activated, only the
[ENERGY SAVE] indicator
the display are off. The machine returns to normal operation
when the [ENERGY SAVE] key
is received.
Misfeed occurs.
→ To remove the misfeed, see "MISFEED REMOVAL".
The tray is out of paper.
→ Load paper.
63
(
)
blinks; all other indicators and
(
)
is pressed, when a print job

TROUBLESHOOTING

Page
7
Page
12
12
12
68
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-c300pl

Table of Contents