Sharp MX-C300P Operation Manual page 71

Digital full color printer
Hide thumbs

Advertisement

Table of Contents
3
Remove the misfed paper.
4
If the misfed paper cannot be removed, remove the paper by pulling it into the paper
output area.
5
Lift the part with the green label that protrudes from the fusing unit paper guide, and
close the fusing unit paper guide.
6
Lift the fusing unit release levers, to return them to their operating positions.
7
Close the side cover.
Be careful not to tear the misfed paper during removal.
The fusing unit is hot. Do not touch the fusing unit when
Warning
removing misfed paper. Doing so may cause a burn or injury.
• When removing misfed paper, do not touch or damage the transfer
Caution
belt.
• Be careful about unfixed toner on the misfed paper not to soil your
hands or clothes.
Be careful not to tear the misfed paper during removal.
The message "
Clear paper path." will be cleared and printing will be
possible.
• When closing the side cover, press on the handle.
Note
• If the paper was torn, make sure that no torn pieces remain in the
machine.
• If the message does not clear, check again to make sure that no
pieces of paper remain.
71
TROUBLESHOOTING

Advertisement

Table of Contents
loading

  Also See for Sharp MX-C300P

This manual is also suitable for:

Mx-c300plMx-c300pe