Replacing The Toner Cartridge; Open The Front Cover - Sharp MX-C300P Operation Manual

Digital full color printer
Hide thumbs Also See for MX-C300P:
Table of Contents

Advertisement

REPLACING THE TONER CARTRIDGE

When the "Prepare a new toner." appears, little toner remains.
You should keep one set of replacement toner cartridges on hand so that you can replace a toner cartridge immediately
when toner runs out.
Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears.
If you continue to use the machine without replacing the cartridge,
the following message will appear when the toner runs out.
Colors that are running low or have run out of toner are indicated in
(
).
: Yellow toner
: Magenta toner
: Cyan toner
: Black toner
Replace the toner cartridges of the indicated colors.
1

Open the front cover.

2
Grasp the handle of the top and bottom of the toner cartridge, pull the toner cartridge
out.
Push on both ends of the front cover and open it.
After removing the toner cartridge, do not shake it or tap on it. Doing so
Caution
may cause toner to leak from the cartridge. Put the old cartridge
immediately in the box of the new cartridge.
Keep used toner cartridges (do not discard them).
Note
Your service technician will collect used toner cartridges.
74
TROUBLESHOOTING
• If any one of the toner
Note
colors runs out (including
black toner), color printing
will not be possible.
If Y, M, or C toner runs out
but Bk toner remains, black
and white printing will still
be possible.
• Be sure to install 4 toner
cartridges (Y/M/C/Bk).
• Do not throw the toner
Warning
cartridge into a fire.
Toner may splatter and
cause burns.
• Store toner cartridges out
of the reach of small
children.
Locations of color toner cartridges
(A) (B) (C) (D)
(A): Yellow
(B): Magenta
(C): Cyan
(D): Black

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-c300pl

Table of Contents