Sharp MX-C300P Operation Manual page 17

Loading the bypass tray
To feed an envelope, first press down the fusing unit
release levers (2 places) to release the pressure,
and then follow the steps below.
1
Open the bypass tray.
2
Push the center of the pressure plate down until it locks into place.
3
Set the paper guides to the paper width.
4
Insert the paper (print face down) all the way into the bypass tray.
After feeding an envelope, be sure to press up and return the fusing unit release levers
Warning
(2 places) to their original positions.
If you loaded paper into the bypass tray, press the [SPECIAL FUNCTION] key (
Note
select the bypass tray.
To prevent a misfeed, verify once more that the paper guides are adjusted to
the width of the paper.
17
BEFORE USING THE MACHINE
Open out the bypass tray extension.
) and select "Paper Select" to