ABOUT THE WEB PAGES
(FOR THE ADMINISTRATOR)
In addition to the menus that appear for users, other menus that can only be used by the administrator appear in the
administrator Web pages.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the
right frame that allows you to configure settings for that item. Settings that can only be configured by the
administrator are explained here.
WEB FUNCTIONS IN THE MACHINE
Configure machine identification information for
the status & alert E-mail function.
"INFORMATION SETUP" (p.104)
To protect the Web site, the system administrator
can establish passwords. Enter a password that
you would like to establish and click the [Submit]
One password can be established for the
administrator and one password can be
established for users.
"PROTECTING INFORMATION PROGRAMMED
IN THE WEB PAGE ([Passwords])" (p.102)
Setting changes can be prohibited and interface
settings can be configured.
"ADMINISTRATOR SETTINGS" (p.103)
Configure parameters required for sending status
messages, such as destination addresses and
"STATUS MESSAGE SETUP" (p.105)
Store destination addresses for alert messages.
"ALERTS MESSAGE SETUP" (p.105)
Unused ports can be disabled for greater security
and port numbers can be changed.
Configure information concerning the e-mail
"SMTP SETUP" (p.104)
Configure settings for LPD and Raw print.