About The Settings; Operation Settings; Default Display Settings; Initial Resolution Setting - Sharp MX-M350U Operation Manual

Hide thumbs Also See for MX-M350U:
Table of Contents

Advertisement

ABOUT THE SETTINGS

This chapter explains settings for the network scanner and Internet fax functions that are configured by the
administrator of the machine. For information on general administrator settings and administrator settings for the
copy and document filing functions, see the administrator settings guide. For information on special settings for the
printer and fax functions, see the manuals for those functions.

Operation settings

The following items are available:

Default display settings

The number of direct address/sender keys
displayed setting
Must input next address key at broadcast setting
The number of file name/subject keys displayed
setting

Initial resolution setting

Scan complete sound setting
Default exposure settings
Default display settings
You can select the initial display that appears when
you press the [IMAGE SEND] key to change to
image send mode or when you press the [CA] key
in image send mode. Normally the initial display is
set to the Condition setting screen (SCAN mode or
FAX mode if the facsimile feature is installed).
The following five selections are available:
● Address book (ABC)
● Address book (Group)
● Fax (if the facsimile feature is installed)
● Scan (if the scan feature is installed)
● Internet-Fax (if the Internet-Fax feature is installed)
When an address book (ABC or Group) is selected,
the selected index of that address book
12) is set as the initial screen.
When [SWITCH AUTOMATICALLY TO COPY
MODE SCREEN] is selected, the display will
automatically switch to the copy mode screen if no
action is taken in the fax / image send mode screen
for 20 seconds.
The number of direct address/sender
keys displayed setting
The number of one-touch keys displayed in each
address book screen can be changed from 6 (the
normal setting) to 9.
Touch [6] or [9] to select the desired number.
NOTE
For the key name that appears in each one-touch
key, a maximum of 18 characters can appear when
the number of one-touch keys displayed is set to 6. A
maximum of 10 characters can appear when the
number of one-touch keys displayed is set to 9.
Must input next address key at
broadcast setting
You can select whether the [NEXT ADDRESS] key
must be touched before entering the next
destination
transmission
set so that touching the [NEXT ADDRESS] key can
be omitted except when the numeric keys are used
to enter one full fax number after another full fax
number in the fax mode.
Example: Normal setting (factory setting)
NEXT ADDRESS
XXXX
Dial
NEXT ADDRESS
XXXX
Dial
If the box is checked, it will no longer be possible to
omit the [NEXT ADDRESS] key as shown in the
above example. Even if the next destination to be
entered is a one-touch key, the [NEXT ADDRESS]
key must be touched before the one-touch key can
be entered. If an operator attempts to enter the next
destination
ADDRESS] key, an alarm will sound.
The number of file name/subject keys
(page 1-
displayed setting
This setting is used to select the number of file
name / subject keys that are displayed in the
screen. The number of keys can be set to 3 or 6.
Touch 3 or 6 to select the desired number.
Initial resolution setting
This is used to change the default resolution setting
for transmission in network scanner mode. The
default resolution is initially set to "300x300dpi"
(SCAN mode) or "STANDARD" (INTERNET-FAX
mode). To change the setting, touch the desired
resolution key.
Select the transmission method to be
1
used (such as Scan or Internet-Fax).
If you wish to use the stored image setting as the
default setting when transmitting an image that
was stored with the document filing function,
check the [APPLY THE RESOLUTION SET
WHEN STORED] box on this screen.
2
Touch the desired resolution key.
Touch the [OK] key.
3
8-4
ADMINISTRATOR SETTINGS
when
performing
(page
2-13). Normally the machine is
One-touch
NEXT ADDRESS
Can be omitted
Can be omitted
(fax mode only)
XXXX
Dial
Cannot be omitted
without
touching
a
broadcast
One-touch
the
[NEXT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m450u

Table of Contents