The administrator settings are used to prohibit changes to the [Condition Settings] and to configure interface
● "Default settings"
● "Fusing Control" :
● "Interface settings"
CONFIGURING A SETTING IN THE ADMINISTRATOR
Click [Administrator Settings] in the menu frame.
The "Default Settings" screen of the [Administrator Settings] will appear. If you wish to select a setting in the
"Default Settings" screen, go to step 3.
Click the desired setting, and make a selection for the setting in the screen that appears.
See "ADMINISTRATOR SETTINGS" for descriptions of the settings.
Click [Submit] to store the entered information.
When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of
the item, and "NO" is selected when checkmark does not appear.
Prohibit Test Page Printing YES, NO
Disable Default Setting
Select the setting for which you wish to prohibit changes.
The temperature of toner fusing is controlled according to the weight of the paper
that is used.
Enable monitoring of data sent to the network port and set restrictions.
This setting is used to prohibit printing of a printer test page.
This setting is used to prohibit changes to the default condition
Set whether lists are printed by 1-sided printing or 2-sided
16 to 23lb.
The temperature of toner fusing is controlled according to the
23+ to 28lb.
weight of the paper that is used.
WEB FUNCTIONS IN THE MACHINE