Sharp MX-C300P Operation Manual page 72

Misfeed in the transport area C
1
Lift up the duplex conveyor lever and open the reversing unit.
2
Remove the misfed paper.
3
Return the duplex conveyor lever to its original position and close the side cover.
The message " Clear paper path." will be cleared and printing will be possible.
• When closing the side cover, press on around the handle.
Note
• If the paper was torn, make sure that no torn pieces remain in the machine.
• If the message does not clear, check again to make sure that no pieces of paper remain.
72
TROUBLESHOOTING