Selecting The Desired Language For Display Messages - Sharp AJ-6110 Setup And Operation Manual

SELECTING THE DESIRED LANGUAGE FOR
DISPLAY MESSAGES
The following message appears when you turn on the unit for the first time after purchasing.
Select the desired language for the display messages. The default setting is "2. English".
Follow the steps shown below to select the desired language.
For display and button functions, refer to "OPERATION PANEL" (See page 40).
To select English
Press the "ENTER" button when the message shown above is
1
on the display panel.
The following message appears.
Repeatedly press
2
on the second line of the display panel.
Press the "ENTER" button.
3
The following message appears. Now, the desired language is successfully selected.
To select languages other than English (Example: To select French)
Repeatedly press
1
on the second line of the display panel.
Press the "ENTER" button.
2
The following message appears.
Repeatedly press
3
on the second line of the display panel.
Press the "ENTER" button.
4
The following message appears. Now, the desired language is successfully selected.
If you need to change the display language after completing the setting, see
"CHANGING THE LANGUAGE SETTING". (See page 58)
14
Downloaded from: http://www.usersmanualguide.com/
Language
2.English
Are you sure?
1.No
or "ARROW" buttons to display "2. Yes"
Updating display
language...
or "ARROW" buttons until "3. Français"
Are you sure?
1.No
or "ARROW" buttons to display "2. Yes"
Changement de
langue...