Removal / Installation (Rzr 4) - Polaris 2011 RANGER RZR Service Manual

FINAL DRIVE
6. Remove the fasteners retaining the plastic skid plate and
remove the skid plate from the vehicle.
Cupped
Washers
7. Remove the propshaft from the vehicle.
8. Reverse removal steps to reinstall propshaft. Use a NEW
Roll Pin (Spring Pin) upon reassembly.

Removal / Installation (RZR 4)

1. Locate the propshaft roll pin and use the Roll Pin Removal
Tool (PN 2872608) to remove the roll pin.
NOTE: Front wheel can be removed to gain better
access to the propshaft roll pin.
Roll Pin Removal Tool (PN 2872608)
2. Remove both front seats.
3. Remove the gear selector cap.
4. Remove the retaining screw and the gear selector handle.
7.12
Screws
9923142 - 2011 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2010 Polaris Sales Inc.
5. Remove the fasteners retaining the center console to access
the propshaft support bearing.
Cap
Screws
Torx Screws
6. Remove the (2) bolts and washers retaining the support
bearing.
Support
Bearing
7. Slide the rear portion of the propshaft back to separate it
from the front portion.
8. Slide the front portion of the propshaft back and away from
the front gearcase to remove it.
Torx Screw
Torx Screws
Remove