Torque Values / Specifications; Shift Lever - Polaris 2011 RANGER RZR Service Manual

TRANSMISSION

TORQUE VALUES / SPECIFICATIONS

Maintain and check/change these items in accordance with the
maintenance schedule in Chapter 2 or during service repairs.
ITEM
Transmission Fill Plugs
Transmission Drain /
Level Plugs
Transmission Case
Screws
Shift Cable Lever Screw
Detent Sleeve Assembly
Outer Detent Screw
Drain Plugs / Check Plug
Ground Speed Sensor
Screw
Gear Position Sensor
Screws
Pivot Pin Set Screw
Park Flange Screws
Transmission Isolator
Mounting Screws
Transmission Lubricant
Capacity
Transfer Case Lubricant
Capacity
Rear Gearcase Fluid
Capacity
Rear Gearcase Fluid
Capacity (INT'L)
8.2
TORQUE VALUE
40-50 ft. lbs. (54-67 Nm)
30-45 in. lbs. (0.2-0.3 Nm)
23-27 ft. lbs. (31-36 Nm)
15-20 ft. lbs. (20-27 Nm)
40-45 ft. lbs. (54-61 Nm)
23-27 ft. lbs. (31-37 Nm)
30-45 in. lbs. (0.2-0.3 Nm)
130-155 in. lbs. (15-18 Nm)
25-40 in. lbs. (3-5 Nm)
100-125 in. lbs. (11-14 Nm)
130-155 in. lbs. (15-18 Nm)
23-27 ft. lbs. (31-36 Nm)
AGL Plus PN 2878068
24 oz. (710 ml)
AGL Plus PN 2878068
14 oz. (414 ml)
ADF PN 2871653
26 oz. (769 ml)
ADF PN 2871653
22 oz. (650 ml)
9923142 - 2011 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2010 Polaris Sales Inc.

SHIFT LEVER

Removal
1. Pry the shift lever cover using a suitable tool and remove
the screw. Pull knob off the shifter.
2. Refer to Chapter 5 for console cover removal.
3. Disconnect cable from shifter.
4. Remove the clip attaching the gear selector to the machine
frame.
5. Lift the gear shift selector out of mounting bracket and
away from frame.
Installation
1. Perform the steps in reverse order to install the gear shift
selector (shifter, cable, console, shift knob).
2. Tighten the shift cable nut to specification.
Shift Cable Nut Torque:
130-155 in. lbs. (14.7-17.5 Nm)
= T