Usb Main Menu; Easy Series - Bosch ICP-EZM2 Easy Series System Reference Manual

Easy Series

9.3.3

USB Main Menu

1.
2.
Figure 9.7 ITS-DX4020-G USB Login Screen
3.
4.
Figure 9.8 ITS-DX4020-G USB Main Menu
The USB main menu appears:
–
–
–
Bosch Security Systems, Inc.
From Windows, start a terminal session (launch Hyper Terminal if you are running
Windows XP or earlier, or download Tera Term if you are running Windows Vista). Set up
a connection on the new virtual serial COM port using the following settings:
– Bit rate: 9600
– Data bits: 8
– Parity: None
– Stop bits: 1
– Flow control: None
Press [Enter].
The ITS-DX4020-G USB login screen opens.
Enter a valid password to log on. The default password is 4020G (all uppercase).
The user interface allows three attempts to correctly enter the password. After three
failed attempts, you must reset the ITS-DX4020-G by removing the jumper plug from the
CONFIG jumpers.
Press [Enter] to continue. The USB main menu opens.
after successfully entering a password
every time the user presses [Enter] without first selecting an option from the main
screen
on returning from a sub-screen
System Reference Guide
ITS-DX4020-G Communicator Configuration | en
F01U087835 | 02 | 2008.10
67