Default The System; Default The Control Panel And The Wlsn Hub; Default Wlsn Devices - Bosch ICP-EZM2 Easy Series System Reference Manual

60 en | Default the System
7

Default the System

7.1

Default the Control Panel and the wLSN Hub

To restore the control panel to its factory settings, including programming data, and erase the
wireless network:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Default the control panel from the Installer Menu of a phone session
11. Press [9][9][9][9] to restore all factory default values.
12. Remove all power to the system.
13. Reconnect the wLSN Hub to the base.
14. Reapply all power to the system.
15. Default all wLSN devices.
7.2

Default wLSN Devices

Defaulting a wLSN device returns it to an undiscovered state.
To default a wLSN device:
1.
2.
3.
4.
F01U087835 | 02 | 2008.10
Remove all power to the system.
Remove the wLSN Hub from its base. Refer to Figure 1.1, Page 6.
Record the current switch settings, then set the switches as follows: S1 = 9, S2 = 8, S3 =
7. Refer to Figure 1.1, Page 6.
Reconnect the wLSN Hub to the base.
Reapply all power to the system.
Wait for the green LED on the wLSN Hub to turn on and then off (approximately 5 sec).
Remove all power to the system.
Disconnect the wLSN Hub from the base again, and reset the switches to their previous
settings. Do not reconnect the wLSN Hub to the base yet.
Reapply all power to the system.
(Section 2.7.2 Initiate a Phone Session from the Control Panel, Page 22), press [4] to select
Expert Programming.
Remove the batteries.
Press and hold the tamper switch.
Reinsert the batteries while holding the tamper switch.
Continue to hold the tamper switch for at least 3 sec. The device's LED turns on.
Release the tamper switch within 5 sec. after the device's LED turns on.
The device's LED briefly turns off and then on, indicating that the device was returned to
an undiscovered state.
For specific instructions for defaulting each wLSN device, refer to the wLSN Reference
Guide (P/N F01U009440).
System Reference Guide
Easy Series
Bosch Security Systems, Inc.