Control Center Programming Items - Bosch ICP-EZM2 Easy Series System Reference Manual

Easy Series
5.2.8

Control Center Programming Items

Speech Configuration Items
Programming Item
Alarm Message Minimum Repeat Time
"No Alarm Report Sent" Announcement
"Cancel Report Sent" Announcement
Time Format
Global Control Center Items
These programming items affect all control centers connected to the control panel.
To send a user fire, emergency (medical) or panic report, the appropriate control center
button and report must be enabled. Refer to Section 5.2.5 Route Reporting Options on Page 50
to enable reports.
Check the appropriate box in the Easy Series User Guide (P/N: F01U0xxxxx) to identify which
buttons are enabled.
Programming Item
Fire Button Alarm
Medical Button Alarm
Panic Button Alarm
One Button Arming
[i]
Invalid Passcode Attempt Limit
Control Center Lockout Time
Bosch Security Systems, Inc.
Item Selections
Number
880 (1 to 255 hrs).
883 0 = Announcement disabled.
1 = Announcement enabled.
884
887 0 = Determined by voice module
1 = Always use 12-hr mode
2 = Always use 24-hr mode
Item Selections
Number
888 0 = Disabled.
1 = Enabled.
889 0 = Disabled.
1 = Enabled
890 0 = Disabled.
1 = Enabled (audible).
2 = Enabled (silent).
891 0 = Disabled (token or passcode required).
1 = Enabled (token or passcode is not required).
892 3 to 8.
893 1 to 30 min.
System Reference Guide
Programming | en 55
Manuf.
Default
12
1
1
0
Manuf.
Default
0
0
0
0
3
3
F01U087835 | 02 | 2008.10