Fcc - Bosch ICP-EZM2 Easy Series System Reference Manual

Easy series
Hide thumbs Also See for ICP-EZM2 Easy Series:
Table of Contents

Advertisement

Easy Series
12.2

FCC

Part 15
This equipment was tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy. If this equipment is
not installed and used according to this document, it might cause harmful interference to
radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user must correct the interference.
Part 68
This equipment complies with Part 68 of FCC rules. A label contains, among other
information, the FCC registration number and ringer equivalency number (REN). If requested,
this information must be provided to the telephone company.
The Bosch Security Systems Easy Series Intrusion Control Panel is registered for connection
to the public telephone network using an RJ38X or RJ31X jack.
The REN determines the number of devices that can be connected to the telephone line.
Excessive REN's on the telephone line might result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of the REN's should not exceed five. To
determine the number of devices that can be connected to the telephone line, contact the
telephone company for the maximum REN for the calling area.
The telephone company notifies you if this equipment harms the telephone network. If
advance notice is not practical, the telephone company notifies the customer as soon as
possible. Also, you are advised of your right to file a complaint with the FCC if you believe it is
necessary to do so.
The telephone company might make changes in its facilities, equipment, operation, or
procedures that could affect the operation of this equipment. If this happens, the telephone
company provides advance notice so you can make the necessary modifications for
maintaining uninterrupted service.
If you experience trouble with the Easy Series Intrusion Control Panel, contact Bosch Security
Systems Customer Service for repair and warranty information. If the trouble harms the
telephone network, the telephone company might request that you remove the equipment
from the network until the problem is resolved. User repairs must not be made, and doing so
voids the user's warranty.
This equipment cannot be used on public coin service provided by the telephone company.
Connection to party line service is subject to state tariffs. Contact your state public utilities
commission for more information.
Bosch Security Systems, Inc.
FCC Registration Number: US:ESVAL00BEZ1; Ringer Equivalence: 0.0B
Service Center: Contact your Bosch Security Systems, Inc. representative for the
location of your service center.
System Reference Guide
Agency Approvals and Requirements | en 113
F01U087835 | 02 | 2008.10

Advertisement

Table of Contents
loading

Table of Contents