Bosch ICP-EZM2 Easy Series System Reference Manual page 124

124 en | Agency Approvals and Requirements
Seal the Enclosure
1.
2.
3.
Figure 12.1 Enclosure Sealing
1
2
3
4
5
F01U087835 | 02 | 2008.10
Open the pre-opened hole which is on the right of the enclosure.
Pass the sealing wire through this hole, and bring the two wires in the corresponding
hole of the enclosure door.
Seal the sealing lead as near as possible from the enclosure.
Enclosure
Sealing Location (pre-opened)
Right side of the enclosure
Right side of the door
Sealing lead
System Reference Guide
Easy Series
Bosch Security Systems, Inc.