Apply System Power - Bosch ICP-EZM2 Easy Series System Reference Manual

Easy Series
2.3

Apply System Power

NOTICE!
Because the control panel is permanently connected equipment, a readily accessible
i
disconnect device must be included into the building installation wiring.
An external earth ground is required to ensure safe and proper system operation. Failure to
ground the system can cause personal injury and degraded system performance, such as
problems with tokens or noise on the control center.
1.
2.
Figure 2.3 Cable tie for MAINS to Power Supply
3.
Bosch Security Systems, Inc.
Connect battery power to the control panel. Refer to Figure 1.1, Page 6.
Use a cable tie to secure the incoming AC wires to the enclosure, where required. Refer
to Figure 2.3, Page 17.
Place the terminal cover over the power supply terminals.
System Reference Guide
System Installation and Configuration | en
F01U087835 | 02 | 2008.10
17