Expert Programming - Bosch ICP-EZM2 Easy Series System Reference Manual

42 en | Programming
5.2

Expert Programming

Each category consists of several related programming items. Each programming item is
assigned a three- or four-digit number.
For No. 4 in the next figure, perform these steps:
1.
2.
3.
The following sections list programming items, item numbers, possible selections, and default
values. Record custom values in the Entry column next to the respective default value.
F01U087835 | 02 | 2008.10
Enter an expert programming item number. For example, 201, Phone Line Supervision.
Enter the desired value using your phone's keypad. For example, press [1] to enable
phone line supervision.
Repeat Steps 1 and 2 to configure other programming items, or press [#] to exit Expert
Programming.
Installer passcode
4-digit default: 5432
6-digit default: 543211
Installer
Phone
Menu
System Reference Guide
1
System
Maintenance
2
User Menu
3
Basic
Programming
4
Expert
Programming
5
Two-Way
Voice Session
6
Custom
Messages
7
Programming
Key
# Exit installer menu and end phone session.
Easy Series
Bosch Security Systems, Inc.