Outputs - Bosch ICP-EZM2 Easy Series System Reference Manual

Easy Series
5.1.4

Outputs

Output devices consist of horns, bells, strobes, or sirens.
Outputs Enter an output number from 1 to 8
1 Set Output Function
– Press [1] to select the current
option.
– Press [2] to hear more options.
– Press [#] to exit Output Function.
# Exit Points
Return to Installer Menu.
NOTICE!
When the installer PIN is entered at the keypad or phone, a 3 sec time window starts. During
i
that time window, a tamper alarm activates the interior siren for only 1 sec. Open the
enclosure door during this time to silence the sirens during maintenance. Once the enclosure
is closed, tamper alarm is restored after a 3 min delay. Tampers are logged and reported.
WARNING!
If you modify system parameters you are responsible for maintaining the system within the
!
scope of the standard and regulations that apply to the hardware and/or the system in which
it is used. In a NF A2P compliant installation, use only NF A2P listed components, and check
that each parameter is in the authorized range.
Bosch Security Systems, Inc.
Output Functions:
– Disabled
– Intrusion
– Intrusion Latching
– Fire
– Fire Latching
– Intrusion and Fire
– Intrusion and Fire Latching
– System Reset
System Reference Guide
Programming | en
Output Functions (cont.):
– System On
– System Ready
– Key Fob On/Off
– Key Fob 2-sec Pulse
– User Controlled
– Interior Intrusion and Fire
– System On (Unoccupied)
F01U087835 | 02 | 2008.10
41