Wlsn Installation Tool - Bosch ICP-EZM2 Easy Series System Reference Manual

80 en | Device Specifications and Overview
10.6

wLSN Installation Tool

Use the wLSN Installation Tool to determine the best locations for wLSN device installation.
The Installation Tool communicates signal strength and packet success ratios through an LCD
display.
Specifications
868 MHz
915 MHz
Power
EN50131-1
LED Displays
The crescent-shaped LED indicates charging status when placed in a docking station.
Refer to Figure 10.1 on Page 80 and Table 10.4 on Page 80.
Figure 10.1 wLSN Installation Tool
1
2
LED (Green)
On
Off
Flashing
Flashing power indicator
Table 10.4 wLSN Installation Tool LED Status
F01U087835 | 02 | 2008.10
ISW-BIT1-HAX, ISW-BIT1-HBX, ISW-BIT1-HCX
ISW-BIT1-HCX
Docked
Batteries
Environmental Class II
Power Indicator
Charging Status LED
Status
Batteries fully charged
Installation Tool operation on battery only.
Batteries charging
Low battery
System Reference Guide
12 VDC nominal, 6 VDC to 14 VDC
3 AAA NiMH rechargeable batteries that require an
initial charge of at least 7 hours of charging.
Operating Life: Up to 50 hours of continuous use on a
single charge.
Easy Series
Bosch Security Systems, Inc.