User Phone Menu - Bosch ICP-EZM2 Easy Series System Reference Manual

Easy Series
1.3.2

User Phone Menu

1
Turn System On or Off
Only use this option
on non-UL systems.
2
Enter user Two-Way
passcode
Voice Session
1
Phone
Menu
3
System
Maintenance
4
User Menu
Only the Master User can
access the full User Menu.
Users 2 to 21 can only change
their own passcode.
5
Operate Outputs
To turn an output on or off, press the
corresponding number key on the phone.
#
Exit
End phone session.
1
Only a user passcode (Users 1 to 21) can access the User Menu.
2
If the system is on, the System Maintenance option is not available.
3
Only the master user can add, change, or delete users. Users 2 to 21 can only change their own passcodes. User voice descriptions are
stored in the voice module and are not transferred to the control panel with programming data.
4
Option 6 allows the master user (User 1) to enable the Installer Passcode. Refer to Expert Programming Item Number 142 in
Section 5.2.2 System Programming Items, Page 43.
Availability of the menu items shown above depends on the system's status.
When recording any description (point, output, user, or custom message), do not press any buttons on your phone until prompted
by the system.
Bosch Security Systems, Inc.
Turn system on and stay inside
1
Turn system on and leave
2
Turn on custom protection
3
To hear this option, custom protection must be
enabled.
# Exit
Talk to person at control center
1
2 Listen to person at control center
# End voice session
1 Set date and time
Full system test
2
System test menu
3
6
2
Event history
4
Reset system
5
# Exit
1 Add new user }
To add or change a user:
Change user
2
3 Delete user
3
Exit
#
System Reference Guide
}
The voice session only lasts 90 seconds.
To reset the timer, press [1] on the phone during talk mode,
or [2] during listen mode.
Warning device test
1
Battery test
2
3 Communication test
4 Control center test
5 Point test
Operate outputs
OR
Expert Programming (Enable Installer Access)
Exit system test menu
#
1 Most recent events
Events by date
2
3 Last alarm event
4 Last 10 events
# Exit
1 Change token
Record description
2
3 Change passcode
Change key fob
4
# Exit
Overview | en
4
F01U087835 | 02 | 2008.10
11