Ethernet Connection For Remote User Control; Figure 11- Ethernet Connection - NTI SPLITMUX Series SPLITMUX-HD-4RT Installation And Operation Manual

SPLITMUX Quad Screen Video Splitter

Ethernet Connection for Remote User Control

To make a remote connection, over the Ethernet, from anywhere on the local area network, connect a CAT5/5e/6 Ethernet
cable with RJ45 male connectors on the ends, wired straight through (pin 1 to pin 1, pin 2 to pin 2, etc.).
connect to the SPLITMUX using the Ethernet at a time.
Note: A direct connection from a computer's Ethernet port to the SPLITMUX "ETHERNET" port may also be made using
the same cable.

Figure 11- Ethernet connection

9
Up to 8 users can