Lan - SAGEMCOM F@ST 2704R Reference Manual

6.4.4 LAN

Object: This is used to configure the IP parameters for the local network (LAN).
• In the Advanced Setup menu, select LAN.
The following screen opens:
Field
Groupname
IP Address
Subnet Mask
Enable IGMP
Snooping
a
Standard Mode
a.
Blocking Mode
Enable IGMP Proxy
on Bridge
Disable DHCP
Server
F@ST 2704R Reference Manual - 253526032-A
Select the required group.
Enter the address of your local network.
Enter your network's subnet mask.
Check this box to activate the IGMP (Internet Group
Management Protocol) protocol. This lets you manage the
declarations of belonging to one or more groups with Multicast
routers.
Check the box if you wish the IGMP snooping runs in normal
mode (transparency with IGMP frames).
Check the box if you wish the IGMP snooping runs in blocking
mode (interception and removal of IGMP frames).
Check the box to activate the IGMP Proxy on Bridge.
Check this box to deactivate your router's DHCP server.
Note: You must configure your computer with the parameters
appropriate to your local network (IP address, subnet
mask and default gateway) as well as enter the primary
and secondary DNS server addresses.
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Action
6- Advanced parameters
Default value
Default
192.168.1.1
255.255.255.0
Not checked
Checked
Not checked
Not checked
Not checked
Page 6-47