Table of Contents
Advertisement
6.4.5.2
Port Triggering
Object:
The purpose of this menu is to open dynamically the firewall ports (open ports) via "Trigger Ports"
when an application (such as games or video) opens a connection via the transport layer (TCP or
UDP).
•
In the Advanced Setup menu, select NAT then select Port Triggering.
The following screen opens:
Field
Application Name
Trigger
Open
WAN Interface
Remove
F@ST 2704R Reference Manual - 253526032-A
Application name.
•
Protocol: Transport protocol (TCP, UDP or TCP/UDP).
•
Port Range: A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port and end port.
•
Protocol: Transport protocol (TCP, UDP or TCP/UDP).
•
Port Range: A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port and end port.
WAN Interface used.
To remove an entry from the list, check the box and click on the [Remove]
button.
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
6- Advanced parameters
Meaning
Page 6-53
Advertisement
Table of Contents
Need help?
Do you have a question about the F@ST 2704R and is the answer not in the manual?
Questions and answers