SAGEMCOM F@ST 2704R Reference Manual page 84

6- Advanced parameters
6.4.2.4 Ethernet over ATM - Bridging
• Select the WAN service type Bridging.
Field
Enter Service
description
Enter 802.1P Priority
Enter 802.1Q VLAN ID
a. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX
Mode.
Page 6-34
Displays the name of the service being configured. This name,
which is allocated automatically, is made up as follows:
Protocol_VPI_ Index _ VCI
For example: br_0_8_32.
Note: You may enter another service name.
Enter a value for the 802.1P Priority. This value is between 0
a
and 7.
Enter a value for the 802.1QVLAN ID. This value is between 0
a.
and 4094.
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Action
F@ST 2704R Reference Manual - 253526032-A
Default
value
br_0_8_32
-1
-1