Table of Contents
Advertisement
A.4 Diagnostics tool
To access the Diagnostic tool:
1. Open your browser.
2.
Enter the router's IP address or enter the following URL: http://myrouter.
3.
In the login screen that appears, enter your username and password.
Default values are:
-
User name: admin
-
Password: etdm
(see the router sticker)
4.
The welcome page of the HTTP configuration tool appears.
5.
Select the Diagnostics menu.
6.
Click on Test. The connections to the LAN, to your DSL Service Provider and to your Internet Service
Provider are tested step-by-step:
-
successful tests are marked as a pass.
-
unsuccessful tests are marked as a fail.
Note
Status DOWN means that an interface was not detected (LAN or Wi-Fi).
Note
FAIL test
Depending on the nature of the test, it is possible that operation of the router or
access to the Internet may not be prejudiced. For example if you do a "Ping" either
to an ATM OAM F5 segment or to a DNS primary address.
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
A- Annex A - Troubleshooting
Page A-5
Advertisement
Table of Contents
