Advertisement
Quick Links
welcome
this is your wi-fi router guide
setting up your wi-fi router
Connect your fibre box (the wall unit) to
the red WAN port on your router using
the cable provided
Plug in the power cable
Press the power button
engineer installed
power supply
your wi-fi router lights
symbol
power
connection
internet
wi-fi
LAN
fibre box
activity
green light
flashing red
red light
green light
green light
green light
slow flashing
fast flashing (2 secs)
off
green light
description
router is working normally
router is booting (up to 10 mins)
router has failed to start up properly
connected to toob's full-fibre network
connected to the internet
wi-fi is active (2.4GHz and/or 5GHz)
WPS is in pairing mode
WPS connection successful
disabled
external device connected via ethernet cable
power supply
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SAGEMCOM CS 50001
Summary of Contents for SAGEMCOM CS 50001
- Page 1 welcome this is your wi-fi router guide setting up your wi-fi router Connect your fibre box (the wall unit) to the red WAN port on your router using the cable provided Plug in the power cable Press the power button engineer installed power supply power supply...
- Page 2 connecting to your wi-fi router Connect using wi-fi: use the wi-fi Connect using wi-fi protected setup Expert mode: you can manage your name and password on the back of (WPS): press the wi-fi pairing button to router through a portal in your internet the router and the wi-fi...
Need help?
Do you have a question about the CS 50001 and is the answer not in the manual?
Questions and answers
Hi, is this VDSL or DSL?
The SAGEMCOM CS 50001 is a DSL modem router, specifically ADSL 2+.
This answer is automatically generated
I don’t know how to get the 2.4 G for installating a camera doorbell
To connect the SAGEMCOM CS 50001 to a 2.4 GHz network for installing a doorbell camera:
1. Access the Wi-Fi settings of the SAGEMCOM CS 50001.
2. Locate and select the 2.4 GHz Wi-Fi network from the available list (SSID).
3. Enter the corresponding password (Pre-Shared Key).
4. Confirm the connection.
Make sure the doorbell camera is compatible with 2.4 GHz Wi-Fi.
This answer is automatically generated
During power outages what power consumption would battery backup with an inverter need to provide
The power consumption in network standby mode with all network ports connected and active is 11.87 watts. Therefore, the SAGEMCOM CS 50001 battery backup with an inverter would need to provide at least 11.87 watts during power outages.
This answer is automatically generated
Hello, is it WiFi 5 or WiFi 6
The SAGEMCOM CS 50001 is WiFi 6.
This answer is automatically generated