Default Username And Password; Default Configuration For The Local Network(Lan); Default Configuration For The Local Wireless Network (Wlan) - SAGEMCOM F@ST 2704R Reference Manual

13- Annex 13 - Default configuration
This section details the values of the default parameters of your F@ST 2704R when it leaves the factory.
These default parameters can be modified by a particular preconfiguration of your F@ST 2704R.

13.1 Default username and password

Username:
Password:
Note
The Username and Password can be different according to the ISP (Internet
Service Provider).

13.2 Default configuration for the local network(LAN)

The following table details the values of the principal LAN parameters of your router (LAN1 to LAN4):
LAN characteristics
LAN1 IP address
LAN2 IP address
LAN3 IP address
LAN4 IP address
BROADCAST, ARP, MULTICAST
Router
NAT/PAT

13.3 Default configuration for the local wireless network (WLAN)

The following table supplies the principal default WLAN parameters of your router.
Characteristics (Wi-Fi)
IP address
Enable Wireless
SSID
Channel
Network Authentication
Page 13-2
admin
etdm (*)
(*) see information given on the router sticker
Value
192.168.1.1/24
_
_
_
(*) see information given on the router sticker
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
State
Internet and HTTP configuration tool access
(bridged)
Activated
The LAN traffic is routed to your ISP
Activated
Value
192.168.1.1/24
Box checked
SAGEM_3325 (*)
Auto
No
F@ST 2704R Reference Manual - 253526032-A