SAGEMCOM F@ST 2704R Reference Manual page 119

Add
• Click on the Add button to display the following screen:
Name
Enable
Interface
Queue Precedence
Queue Scheduler
Queue Weight
[1-63]
DSL Latency
a. This field appears only if the DSL mode selected is IPOA.
F@ST 2704R Reference Manual - 253526032-A
Field
Enter a representative name.
Select from the scroll down list:
• Disable: To disable the QoS queue entry
• Enable: To enable the QoS queue entry
Select from the scroll down list:
• Blank
• 8/32: Interface name.
Select from the scroll down list:
• Blank
• 1: High priority for this queue,
• 2: Medium priority for this queue,
• 3: Low priority for this queue.
Note: A high priority leads to low packet loss.
Select from the list:
a
• Weighted Round Robin
• Weighted Fair Queuing
Enter the corresponding value of the queue weight.
a
a Select the DSL latency from the scroll down list.
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
6- Advanced parameters
Action
Page 6-69