Sharp AR-M455N Service Manual page 202

66-6
Purpose User data output/Check (Display/Print)
Function Used to print the confidential pass code. (Used
(Purpose) when the confidential pass code is forgotten.)
(Only when FAX is installed)
Section FAX
Item Data
Operation/Procedure
1 PRINT START
The paper is automatically selected with the size saved in the
image memory.
SIMULATION 66-6
PASS CODE PRINT OUT. PRESS START.
1.PRINT START
Press [START] key.
When there is no print data,
the display returns to the
original state without printing.
(When 1)
SIMULATION 66-6
PASS CODE PRINT OUT. EXECUTING···.
1.PRINT START
After completion of printing
66-7
Purpose User data output/Check (Display/Print)
Function Used to print the image memory data (memory
(Purpose) send/receive). (Only when FAX is installed)
Section FAX
Item Data
Operation/Procedure
All image data stored in the image memory are printed.
∗ The confidential receive data are also printed.
1 PRINT START
The paper is automatically selected with the size saved in the
image memory.
SIMULATION 66-7
IMAGE MEMORY PRINT OUT. PRESS START.
1.PRINT START
Press [START] key.
(When 1)
SIMULATION 66-7
IMAGE MEMORY PRINT OUT. EXECUTING···.
1.PRINT START
After completion of printing
Print start
Print start
AR-M355N/M455N SIMULATION 9 - 76
66-8
Purpose Operation test/Check
Function Used to check the output operation of various
(Purpose) sound signals of FAX. (Used to check the
operation of the sound output IC.) Send level:
Max. (Only when FAX is installed)
Section FAX
Item Operation
Operation/Procedure
1) Enter the number corresponding to the output mode with 10-
key.
2) Press [START] key.
The output is delivered at the max. level.
1 NONE Mute 11 MESSAGE 9
2 PAUSE Pause sound 12 MESSAGE 10
3 MESSAGE1 Message 1 13 MESSAGE 11
4 MESSAGE2 Message 2 14 MESSAGE 12
5 MESSAGE3 Message 3 15 MESSAGE 13
6 MESSAGE4 Message 4 16 MESSAGE 14
7 MESSAGE5 Message 5 17 MESSAGE 15
8 MESSAGE6 Message 6 18 ALARM
9 MESSAGE7 Message 7 19 RINGER
10 MESSAGE8 Message 8 20 EXT.TEL.RINGER External TEL ring
When the number is entered during execution, the kind of signal
can be changed.
When [START] key is pressed, the voice message is sent. When
[CUSTOM SETTINGS] key is pressed, it is stopped.
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX)
START.
1.NONE 2.PAUSE
4.MESSAGE2 5.MESSAGE3
7.MESSAGE5 8.MESSAGE6
10.MESSAGE8 11.MESSAGE9
13.MESSAGE11 14.MESSAGE12
16.MESSAGE14 17.MESSAGE15
19.RINGER 20.EXT.TEL.RINGER
Select other 1, and press [START] key.
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX)
START. EXECUTING···.
1.NONE 2.PAUSE
4.MESSAGE2 5.MESSAGE3
7.MESSAGE5 8.MESSAGE6
10.MESSAGE8 11.MESSAGE9
13.MESSAGE11 14.MESSAGE12
Same
16.MESSAGE14 17.MESSAGE15
display
19.RINGER 20.EXT.TEL.RINGER
Select 2, and press [START] key.
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX)
START. EXECUTING···.
1.NONE 2.PAUSE
4.MESSAGE2 5.MESSAGE3
7.MESSAGE5 8.MESSAGE6
10.MESSAGE8 11.MESSAGE9
13.MESSAGE11 14.MESSAGE12
16.MESSAGE14 17.MESSAGE15
19.RINGER 20.EXT.TEL.RINGER
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX)
START.
1.NONE 2.PAUSE
4.MESSAGE2 5.MESSAGE3
7.MESSAGE5 8.MESSAGE6
10.MESSAGE8 11.MESSAGE9
13.MESSAGE11 14.MESSAGE12
16.MESSAGE14 17.MESSAGE15
19.RINGER 20.EXT.TEL.RINGER
Message 9
Message 10
Message 11
Message 12
Message 13
Message 14
Message 15
Alarm
Call ring
SELECT 1-20, AND PRESS
3.MESSAGE1
6.MESSAGE4
2
9.MESSAGE7
12.MESSAGE10
15.MESSAGE13
18.ALARM
Press [CUSTOM SETTINGS] key.
SELECT 1-20, AND PRESS
3.MESSAGE1
6.MESSAGE4
1
9.MESSAGE7
12.MESSAGE10
15.MESSAGE13
18.ALARM
SELECT 1-20, AND PRESS
3.MESSAGE1
6.MESSAGE4
2
9.MESSAGE7
12.MESSAGE10
15.MESSAGE13
18.ALARM
Press [CUSTOM SETTINGS] key.
SELECT 1-20, AND PRESS
3.MESSAGE1
6.MESSAGE4
2
9.MESSAGE7
12.MESSAGE10
15.MESSAGE13
18.ALARM