Sharp AR-M150 Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. All in One Printer
  5. AR-M150 Online
  6. Operation manual

Sharp AR-M150 Operation Manual

Digital multifunctional system
Hide thumbs Also See for AR-M150:
Table of Contents

Advertisement

Quick Links

See also: Online Manual , Service Manual
MODEL
AR-M150
AR-M155
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Sharp AR-M150

Summary of Contents for Sharp AR-M150

  • Page 1 MODEL AR-M150 AR-M155 DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL...
  • Page 2 If the AR-M150/AR-M155 is used without the facsimile expansion kit AR-FX9, then the following directives are applicable : If the AR-M150/AR-M155 is used with the facsimile expansion kit AR-FX9, please refer to the Declaration Of Conformity in the AR-FX9 operation manual.

  • Page 3: Table Of Contents

    CONTENTS CAUTIONS ........................ 3 ENVIRONMENTAL INFORMATION ................. 5 INTRODUCTION ....................... 6 MAIN FEATURES ..................... 7 1 PREPARATIONS PART NAMES ....................9 POWER ON AND OFF..................12 2 LOADING PAPER PAPER ......................14 LOADING THE PAPER TRAY ................ 15 BYPASS FEED (including special paper)............17 CHANGING A TRAY'S PAPER SIZE SETTING ..........
  • Page 4 6 PRINTER/SCANNER FUNCTIONS USING THE PRINTER MODE ................ 58 BASIC PROCEDURE FOR PRINTING ............58 USING THE SCANNER MODE............... 59 SCANNING USING THE KEYS ON THE MACHINE ........59 SCANNING FROM YOUR COMPUTER ............60 OPERATION IN COPY, PRINTER, AND SCANNER MODES ....... 60 HOW TO USE THE ONLINE MANUAL............

  • Page 5: Cautions

    CAUTIONS Caution label on the machine The label ( ) in the fusing area of the machine indicates the following: : Caution, risk of danger : Caution, hot surface Cautions on using the machine Follow the cautions below when using this machine. Warning: •...

  • Page 6: Cautions On Handling The Machine

    Cautions on handling the machine Be careful in handling the machine as follows to maintain the performance of this machine. Do not drop the machine, subject it to shock or strike it against any object. Do not drop the unit, subject it to shock or strike it against any object. Store spare toner cartridges in a cool dry place without removing from the package before use.

  • Page 7: Environmental Information

    ENVIRONMENTAL INFORMATION ® As an NERGY Partner, SHARP has determined that ® this product meets the NERGY guidelines for energy efficiency. A small amount of ozone is produced within the unit during operation. The emission level is insufficient to cause any health hazard.

  • Page 8: Introduction

    INTRODUCTION Some model may not be available in certain countries. Note Using the manual This machine has been designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. To get full use of all machine features, be sure to familiarize yourself with this manual and the machine.

  • Page 9: Main Features

    Explanation of illustration Depending on the model you have and on the options installed, some of the illustrations in this manual may be different, however, the basic operations are the same. Model AR-M155 (With optional RSPF installed) Appearance Document cover/ •...
  • Page 10 Enhanced copying features • Zoom copies can be made from 25% to 400% in increments of 1%. (When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.) • Continuous copying of up to 99 copies is possible. •...

  • Page 11: Preparations

    Chapter 1 PREPARATIONS This chapter provides basic information that you should know before using the machine. PART NAMES SPF/RSPF (Option) Reversing tray (RSPF only) Original guides Document feeder cover Exit area Document feeder tray Bypass tray Interface Toner cartridge connector Parallel connector Photoconductive...

  • Page 12: Operation Panel

    PREPARATIONS Operation panel AR-M155 MENU 1,2,3, ZOOM 1,2,3, SP. FUNC 10 11 12 13 14 [MODE SELECT] key / Mode indicators [TRAY SELECT] key ( Press this key to select the mode. The Use to select the paper tray that has the indicator of the selected mode lights (copy, desired paper for copying.
  • Page 13 PREPARATIONS Display READY TO COPY. 100% 16 17 Shows the current copy ratio. [ZOOM] key Press to select an enlargement or Shows the selected paper size. reduction ratio. Shows the number of copies that has To select a preset ratio setting, press the been entered with the numeric keys.

  • Page 14: Power On And Off

    POWER ON AND OFF The power switch is located on the left side of the machine. If you use the machine in a country other than the country Caution where the machine was purchased, you will need to make sure that your local power supply is compatible with your model.

  • Page 15: Power Off

    PREPARATIONS About the scan head The scan head lamp remains on constantly when the machine is in the ready condition (when the ready indicator is illuminated). The machine adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not indicate machine trouble.

  • Page 16: Loading Paper

    The tray location indicator will blink when there is no paper in the selected paper tray, or when the selected paper tray is not installed or is improperly installed. PAPER For best results, use only SHARP recommended paper. Paper tray Paper type...

  • Page 17: Loading The Paper Tray

    ● There are many varieties of special paper available on the market, and some cannot be used with this machine. Before using special paper, contact your authorised service representative. ● Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable. LOADING THE PAPER TRAY...
  • Page 18 LOADING PAPER Gently push the paper tray back into the machine. • If you loaded a different size of paper than was loaded previously in Note the tray, go to "CHANGING A TRAY'S PAPER SIZE SETTING" (p.19) • When not using the machine for an extended period, remove all paper from the paper tray and store it in a dry place.

  • Page 19: Bypass Feed (Including Special Paper)

    • When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps (not the closure flap). • Special papers except SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray.

  • Page 20: Loading Paper In The Bypass Tray

    LOADING PAPER Loading paper in the bypass tray • Paper must be fed narrow side first into the feed slot. Note • Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray. •...

  • Page 21: Changing A Tray's Paper Size Setting

    CHANGING A TRAY'S PAPER SIZE SETTING Follow these steps to change a tray's paper size setting. • The paper size setting cannot be changed when the machine has Note stopped temporarily due to running out of paper or a misfeed. •...

  • Page 22: Making Copies

    Chapter 3 MAKING COPIES This chapter explains basic copying functions. NORMAL COPYING Using the document glass • The document glass can scan up to a A4 (8-1/2" x 14") original. Note • When a copy is made, the edges will not be copied (image loss). For the image loss, see the "SPECIFICATIONS"...
  • Page 23 MAKING COPIES Removing the document cover To copy large originals like newspapers, remove the document cover. To remove the cover, lift straight up as shown. To replace the cover, do the reverse. The SPF/RSPF cannot be removed. Using the SPF/RSPF •...

  • Page 24: Stream Feeding Mode

    MAKING COPIES Originals that cannot be used in the SPF/RSPF The following originals cannot be used. These may cause misfeeds or smudging and unclear images. • Transparencies, tracing paper, other transparent or translucent paper, and photographs. • Carbon paper, thermal paper. •...

  • Page 25: Selecting The Tray

    MAKING COPIES Setting the number of copies Press the numeric keys to set the number of copies. OPY. The set number of copies appears in the display. A maximum of 99 copies can be set. If you wish to make only a single copy, copying is possible with the display showing "0".

  • Page 26: Making A Copy Darker Or Lighter

    MAKING A COPY DARKER OR LIGHTER Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two original types and five exposure levels for each original type.) The exposure level used in automatic exposure adjustment can also be changed with "AE LEVEL ADJUST"...

  • Page 27: Reduction/Enlargement/Zoom

    REDUCTION/ENLARGEMENT/ZOOM Copies can be reduced down to 25% or enlarged up to 400%. (When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.) The [ZOOM] key can be pressed to quickly select a ratio from among eight preset ratios. In addition, the [ key ( ) and [ ] key (...

  • Page 28: Convenient Copy Functions

    Chapter 4 CONVENIENT COPY FUNCTIONS AUTOMATIC TWO-SIDED COPYING Two originals can be automatically copied onto both sides of a single sheet of paper. When the RSPF is used, two-sided copies of two-sided originals can easily be made. Original → Paper Usable paper One-sided original →...

  • Page 29: Using The Document Glass

    CONVENIENT COPY FUNCTIONS Using the document glass Place the original that you wish to copy onto the front side of the paper on the document glass and close the document cover/SPF/RSPF. Press the [2-SIDED COPY ( )] key until 2-SIDED COPY "1 TO 2"...
  • Page 30 CONVENIENT COPY FUNCTIONS Using the SPF/RSPF Place the original(s) in the SPF/RSPF. (p.21) If you place an odd number of originals for one-sided to two-sided copying, the last page will be one-sided. Press the [2-SIDED COPY ( )] key and 2-SIDED COPY select the two-sided copy mode that you 2 TO 1...

  • Page 31: Sort Copy

    SORT COPY Copies of multiple original pages can be sorted into sets. The number of pages that can be scanned varies depending on the Note original type (photo, text, etc.) and the amount of memory allocated to the printer. The amount of memory allocated to the printer can be changed with "MEM.

  • Page 32: Offset Function During Sort Copy

    CONVENIENT COPY FUNCTIONS Using the SPF/RSPF Place the originals. (p.21) • If "SORT AUTO SELECT" is enabled in the user programs, the default output Note mode for copying from the RSPF is sort mode (p.65). In this case go directly to step 4.

  • Page 33: Copying Multiple Originals Onto A Single Sheet Of Paper (2 In 1 Copy)

    COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER (2 IN 1 copy) Multiple originals can be copied onto a single sheet of paper in a selected layout pattern. This function is convenient for compiling multi-page reference materials into a compact format, or for providing an overview of all pages of a document on a single page.
  • Page 34 CONVENIENT COPY FUNCTIONS Press the [ ] key ( ) or [ ] key ( ) to ORIG. SIZE ENTER select the original size and then press the [OK] key. The following original sizes can be selected: "A4", "B5", "A5", "8.5x14", "8.5x13", "8.5x11", 1,2,3, "5.5x8.5".
  • Page 35 CONVENIENT COPY FUNCTIONS Using the SPF/RSPF Place the originals. (p.21) Press the [E-SORT/SP.FUNC ( )] key 1,2,3, 1,2,3, SP. FUNC SPECIAL FUNCTION until "2IN1" appears and then press the 2IN1 [OK] key. 1,2,3, 1,2,3, SP. FUNC Press the [ ] key ( ) to move "...

  • Page 36: Creating Margins When Copying (Margin Shift)

    CREATING MARGINS WHEN COPYING (Margin shift) The margin shift function is used to automatically shift the text or image or the copy paper approximately 10 mm (1/2"). As shown below, LONG EDGE or SHORT EDGE can be selected. SHORT EDGE LONG EDGE SPF/RSPF Margin...
  • Page 37 CONVENIENT COPY FUNCTIONS Press the [ ] key ( ) to move " " to MARGIN SHIFT the "ON" position and then press the [OK] key. 1,2,3, 1,2,3, SP. FUNC Press the [ ] key ( ) or [ ] key ( ) to MARGIN SHIFT select the margin position and then press...

  • Page 38: Set Up The Software

    Chapter 5 SET UP THE SOFTWARE This chapter explains how to install and configure the software that is required for the printer and scanner functions of the machine. The procedure for viewing the Online Manual is also explained. • The screen images in this manual are mainly for Windows XP. With Note other versions of Windows, some screen images may be different from those in this manual.

  • Page 39: Before Installation

    BEFORE INSTALLATION Hardware and software requirements Check the following hardware and software requirements in order to install the software. Computer type IBM PC/AT or compatible computer equipped with a USB2.0* /1.1* or bi-directional parallel interface (IEEE1284) Windows 95, Windows 98, Windows Me, Windows NT Operating system* Workstation 4.0 (ServicePack 5 or later)* , Windows 2000...

  • Page 40: Installing The Software

    INSTALLING THE SOFTWARE • If you need to use a different connection method after installing the Note software based on a USB or parallel connection, you must first uninstall the software (p.78) and then install it using the new connection method. •...
  • Page 41 SET UP THE SOFTWARE The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the software license, and then click the "Yes" button. Read the "Readme First" in the "Welcome" window and then click the "Next" button. Click the "Standard"...

  • Page 42: Custom Installation

    SET UP THE SOFTWARE Follow the instructions in the plug and play window to install the MFP driver. Follow the on-screen instructions. If you are running Windows 2000/XP and a warning message appears Caution regarding the Windows logo test or digital signature, be sure to click "Continue Anyway"...
  • Page 43 SET UP THE SOFTWARE The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the software license, and then click the "Yes" button. Read the "Readme First" in the "Welcome" window and then click the "Next" button. Click the "Custom"...
  • Page 44 SET UP THE SOFTWARE When you are asked how the printer is connected, select "Connected to this computer" and click the "Next" button. If you are using the machine as a shared printer on a network, select "Connected via the network".
  • Page 45 SET UP THE SOFTWARE If the following screen appears during installation of Sharpdesk, click Caution the "Skip" button or the "Continue" button as appropriate to continue the Sharpdesk installation. If "Skip" is selected, the Sharpdesk installation will continue without installing Sharpdesk imaging. If "Continue"...
  • Page 46 SET UP THE SOFTWARE If you are running Windows XP and a warning message appears Caution regarding the Windows logo test or digital signature, be sure to click "Continue Anyway". A "USB 2.0 Composite Device" installation window may appear prior to Note this procedure.
  • Page 47 SET UP THE SOFTWARE When you are asked how the printer is connected, select "Connected to this computer" and click the "Next" button. When the interface selection screen appears, select "USB" and click the "Next" button. If you are using the machine as a shared printer on a network, select "Connected via the network".
  • Page 48 SET UP THE SOFTWARE Follow the instructions in the plug and play window to install the MFP driver Follow the on-screen instructions. If you are running Windows 2000 and a warning message appears Caution regarding the Windows logo test or digital signature, be sure to click "Yes".
  • Page 49 SET UP THE SOFTWARE When you are asked how the printer is connected, select "Connected to this computer" and click the "Next" button. If you are using the machine as a shared printer on a network, select "Connected via the network".

  • Page 50: Using The Machine As A Shared Printer

    SET UP THE SOFTWARE When the model selection window appears, select model name of your machine and click the "Next" button. Follow the on-screen instructions. If you are running Windows 2000 and a warning message appears Caution regarding the Windows logo test or digital signature, be sure to click "Yes".
  • Page 51 SET UP THE SOFTWARE Click the "MFP Driver" button. To view detailed information on the software, click the "Display Readme" button. The "Welcome" window will appear. Click the "Next" button. When you are asked how the printer is connected, select "Connected via the network"...
  • Page 52 SET UP THE SOFTWARE Select the network printer that is shared and click the "OK" button. Ask your network administrator for the server name and printer name of the machine on the network. In the printer port selection window, verify the network printer that is shared and whether the machine is to be used as the default printer, make the selections and click the "Next"...

  • Page 53: Setting Up Button Manager

    Windows XP Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras". Click the "SHARP AR-M155" icon and select "Properties" from the "File" menu. In the "Properties" screen, click the "Events" tab.
  • Page 54 Repeat Steps 4 through 6 to link Button Manager to "SC2:" through "SC6:". Select "SC2:" from the "Select an event" pull-down menu. Select "Start this program", select "Sharp Button Manager E" from the pull-down menu, and then click the "Apply" button. Do the same for each ScanMenu through "SC6:".
  • Page 55 Note click "view all Control Panel options". Select "SHARP AR-M155" and click the "Properties" button. In Windows Me, right click "SHARP AR-M155" and click "Properties" in the pop-up menu. In the "Properties" screen, click the "Events" tab. Select "SC1:" from the "Scanner events"...
  • Page 56 Repeat Steps 5 through 7 to link Button Manager to "SC2:" through "SC6:". Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp Button Manager E" in "Send to this application" and click the "Apply" button. Do the same for each ScanMenu through "SC6:".

  • Page 57: Connecting The Machine To Your Computer

    CONNECTING THE MACHINE TO YOUR COMPUTER Connecting a USB cable Follow the procedure below to connect the machine to your computer. A USB cable for connecting the machine to your computer is not included with the machine. Please purchase the appropriate cable for your computer. •...
  • Page 58 SET UP THE SOFTWARE Connecting a parallel cable Obtain an IEEE1284 shielded parallel interface cable. Insert the cable into the parallel interface connector located on the rear of the unit, and fasten with clasps. Insert the other end of the cable into the interface connector of your computer.

  • Page 59: Printer/Scanner Functions

    Chapter 6 PRINTER/SCANNER FUNCTIONS The machine includes a USB connector and a parallel connector as standard equipment. When the USB connector is used, the printer and scanner functions can be used. When the parallel connector is used, the printer function can be used. The machine has the following features: •...

  • Page 60: Using The Printer Mode

    USING THE PRINTER MODE The procedure for loading paper for printing is the same as for loading copy paper. See "LOADING PAPER" (p.14). • Print jobs received while the machine is copying will be stored in Note memory. When the copy job is finished, the print jobs will begin printing.

  • Page 61: Using The Scanner Mode

    USING THE SCANNER MODE The procedure for placing the original is the same as for copying. See "NORMAL COPYING" (p.20). Scanner mode cannot be used at the following times: Note • A misfeed has occurred (paper misfeed or original misfeed in the SPF/RSPF).

  • Page 62: Scanning From Your Computer

    PRINTER/SCANNER FUNCTIONS Button Manager scan menu For information on Button Manager settings, see the Button Manager help file. The names in the Button Manager menu ("xxxx" in "SC1:xxxx", etc.) can be changed. See the online manual. SCANNING FROM YOUR COMPUTER The machine supports the TWAIN standard, making it possible to scan from TWAIN- compliant applications.

  • Page 63: How To Use The Online Manual

    HOW TO USE THE ONLINE MANUAL The online manual provides detailed instructions for operating the unit as a printer and scanner. It also provides methods for dealing with printing or scanner problems. To access the online manual, your computer must have Acrobat Reader 5.0 or later. If this is not installed, refer to "Installing Acrobat Reader"...

  • Page 64: User Settings

    Chapter 7 USER SETTINGS The user settings allow you to customize machine settings to better meet your needs. USER PROGRAMS The user settings consist of the following items. To change the user program settings as explained in "SELECTING A SETTING FOR A USER PROGRAM"...
  • Page 65 USER SETTINGS Setting codes (factory default Program Program name Explanation setting appears number in bold) • This function automatically switches the machine to a state that consumes even less power than preheat mode if the set duration of time elapses without the machine being used when the power is on.
  • Page 66 USER SETTINGS Setting codes (factory default Program Program name Explanation setting appears number in bold) • When two-sided copying is performed, this function rotates the image on the back ROTATE ORIG. 1: ON of the original. This is IMAGE 2: OFF convenient when binding the copies at the top (tablet binding).
  • Page 67 USER SETTINGS Setting codes (factory default Program Program name Explanation setting appears number in bold) • Use this setting to select how long a key must be pressed 1: NORMAL for the input to be accepted. 2: 0.5 SEC. By selecting a longer time, KEY PRESS TIME 3: 1.0 SEC.

  • Page 68: Print Mode

    USER SETTINGS Print mode Setting codes (factory default Program Program name Explanation setting appears number in bold) • When this function is enabled, printing in printer mode will automatically continue using a FORCED 1: ON different size of paper if the OUTPUT specified size of paper runs 2: OFF...

  • Page 69: Selecting A Setting For A User Program

    SELECTING A SETTING FOR A USER PROGRAM Press the [MENU] key and then press the MAIN MENU [OK] key. 1:USER PROGRAM In printer mode, the user programs are accessed by simply pressing the [MENU] key. 1,2,3, 1,2,3, SP. FUNC Press the [ ] key ( ) or [ ] key (...
  • Page 70 USER SETTINGS Audible signals (key entry beep, invalid key beep, base setting beep) The machine sounds three different types of beep signals: a key entry beep that sounds when a valid key is pressed, an invalid key beep that sounds when an invalid key is pressed, and a base setting beep that sounds when a setting is the same as the base setting (base settings are explained below).

  • Page 71: Troubleshooting And Maintenance

    When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the indicated page. Be sure to use only genuine SHARP parts and supplies. Note Indication...
  • Page 72 CARTRIDGE IS needed soon. Prepare a new cartridge. NEAR EMPTY. Error Steadily indicator MAINTENANCE Service by an authorized SHARP REQUIRED CALL service technician is required. FOR SERVICE MEMORY FULL, PRESS START TO Data is being held in memory. Print the RESUME.

  • Page 73: Troubleshooting The Machine

    TROUBLESHOOTING THE MACHINE The following problems are related to the general operation of the machine and copying. Problem Cause and solution Page The machine is not plugged into a power outlet. → Plug the machine into a grounded outlet. Power switch OFF. →...
  • Page 74 TROUBLESHOOTING AND MAINTENANCE Problem Cause and solution Page The original was not placed in the 20, 21 correct position. → Place the original correctly. An appropriate ratio was not used for the size of the original and the size of the paper.
  • Page 75 TROUBLESHOOTING AND MAINTENANCE Problem Cause and solution Page Misfeed occur. → To remove the misfeed, see "MISFEED REMOVAL". The paper is outside of the specified size and weight range. → Use copy paper within the specified range. Paper curled or damp. →...
  • Page 76 TROUBLESHOOTING AND MAINTENANCE Problem Cause and solution Page Copying or printing is performed. → Set the paper size after copying or printing is complete. Paper size for a paper The machine has stopped temporarily tray cannot be set. due to running out of paper or a 19, 79 misfeed.

  • Page 77: Problems During Setup Of The Software

    PROBLEMS DURING SETUP OF THE SOFTWARE If the software does not install correctly, check the following items on your computer. To remove the software, see "Removing the software" (p.78). MFP driver cannot be installed (Windows 2000/XP) If the MFP driver cannot be installed in Windows 2000/XP, follow these steps to check your computer's settings.
  • Page 78 TROUBLESHOOTING AND MAINTENANCE Plug and play screen does not appear (USB only) If the Plug and Play screen does not appear after you connect the machine to your computer with a USB cable and turn on the machine, follow the steps below to verify that the USB port is available.

  • Page 79: Parallel Cable

    In Windows 2000, double-click the "System" icon, click the "Hardware" Note tab, and click the "Device Manager" button. Click the icon beside "Other devices". If "AR-M155" and "SHARP AR-M155" appear, select and delete both of these items. If "Other devices" does not appear, close the "Device Manager" Note window.

  • Page 80: Removing The Software

    TROUBLESHOOTING AND MAINTENANCE Select "FILE:" in the "Print to the following port" list box, and click the "OK" button. Click the "SHARP AR-M155" printer driver icon and select "Properties" from the "File" menu. Click the "Ports" tab. In Windows 95/98/Me, click the "Details" tab.

  • Page 81: Misfeed Removal

    MISFEED REMOVAL When a misfeed occurs, the error indicator blinks, "CLEAR PAPER JAM" appears in the display, and the machine stops operating. If a misfeed occurs when using the SPF/RSPF, "RETURN X ORIGINAL(S) START TO RESUME" will appear in the display.

  • Page 82: A: Misfeed In The Paper Feed Area

    TROUBLESHOOTING AND MAINTENANCE A: Misfeed in the paper feed area Gently remove the misfed paper from the paper feed area as shown in the illustration. If the error indicator blinks and the misfed paper is not visible in the paper feed area, pull out the paper tray and remove the misfed paper.
  • Page 83 TROUBLESHOOTING AND MAINTENANCE Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area". The fusing unit is hot. Do not touch the fusing unit when Warning removing misfed paper.
  • Page 84 TROUBLESHOOTING AND MAINTENANCE Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up. When closing the covers, be sure to close the front cover securely and Caution then close the side cover.

  • Page 85: Toner Cartridge Replacement

    TROUBLESHOOTING AND MAINTENANCE (C) If the original does not move easily into the exit area, remove it in the direction of the arrow while rotating the roller. "RETURN X ORIGINAL(S) START TO RESUME" will appear in the Note display. Return the indicated number of pages to the document feeder tray.
  • Page 86 TROUBLESHOOTING AND MAINTENANCE Open the bypass tray, and then open the side cover while pressing the side cover open button. Push gently on both sides of the front cover to open the cover. Gently pull the toner Toner cartridge lock release lever cartridge out while pressing the lock release lever.
  • Page 87 TROUBLESHOOTING AND MAINTENANCE Remove the toner cartridge from the bag. Grasp the cartridge on both sides and shake it horizontally four or five times. After shaking the cartridge, remove the toner seal. 4 or 5 times Shutter Toner seal Grasp the toner cartridge as shown in the illustration. Do not hold the Note cartridge by the shutter.

  • Page 88: Scan Head Locking Switch

    TROUBLESHOOTING AND MAINTENANCE Close the front cover and then the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up. When closing the covers, be sure to close the front cover securely and Caution then close the side cover.

  • Page 89: Checking The Total Count

    * When the optional Facsimile Expansion Kit is installed. MAINTENANCE REQUIRED When the error indicator will blink and "MAINTENANCE REQUIRED CALL FOR SERVICE" will appear in the display, service by an authorized SHARP service technician is required. Contact your authorised service representative as soon as possible.

  • Page 90: Cleaning The Machine

    CLEANING THE MACHINE Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to clean the machine on a regular basis. Do not spray flammable cleaner gas. Gas from the spray may...

  • Page 91: Transfer Charger

    TROUBLESHOOTING AND MAINTENANCE Transfer charger Turn the power switch off. (p.13) Ensure that the bypass tray is open and then open the side cover while pressing the side cover open button. Take the charger cleaner out by holding the tab. Set the charger cleaner onto the right end of the transfer charger, gently slide the cleaner to the left end, and then remove it.

  • Page 92: Optional Equipment

    A number of options are available for the unit which allow you to configure a system to meet your particular needs. The options include the following. • Be sure to use only genuine SHARP parts and supplies. Note • Some options may not be available in certain countries and regions.

  • Page 93: 250-Sheet Paper Feed Unit (Ar-D16)

    250-SHEET PAPER FEED UNIT (AR-D16) The paper feed unit provide the convenience of increased paper capacity for the unit and a greater choice of paper size readily available for copying. The procedures for loading paper in the paper tray of paper feed unit, changing the paper size, and selecting the paper tray are same as for the paper tray in the unit.

  • Page 94: Supply List

    Click "Control Panel", select "Printer and Other Hardware", and then click "Printer and Faxes". On Windows 95/98/Me/NT 4.0/2000, select "Setting" and click "Printers". Click the "SHARP AR-M155" printer driver icon and from the "File" menu select "Properties". On Windows 95/98/Me, click the "SHARP AR-M155" printer driver icon, select "Properties"...

  • Page 95: Appendix

    Chapter 10 APPENDIX SPECIFICATIONS AR-M150 AR-M155 Model Digital Multifunctional System, Desktop Type Photoconductive OPC drum type Document glass Fixed type Copy/printing Dry, electrostatic transfer system Sheets, bound documents Originals Max. A4 (8-1/2" x 14") Originals size Max. A4 (8-1/2" x 14") Min.
  • Page 96 APPENDIX Heat rollers Fusing system Magnetic brush development Developer system Tri-color CCD light source (CCD: 3 components; R, G, and B) Light source Scan: 600 x 300 dpi Output: 600 x 600 dpi(AUTO/TEXT mode) Resolution Scan: 600 x 600 dpi Output: 600 x 600 dpi(PHOTO mode) Scanning: 256 Printing: 2 value Gradation Local voltage ±10% (For this machine's power supply...

  • Page 97: Printer Function

    Printer Function 15ppm Print speed 600 dpi Resolution Approx. 10MB Memory SPLC (Sharp Printer Language with Compression) Emulation IEEE 1284-compliant bi-directional parallel interface Interface USB 2.0 (Full-Speed/Hi-Speed compatible interface) [USB cable] USB cable that supports USB 2.0. Please purchase a commercially available USB cable.

  • Page 98: Scanner Function

    APPENDIX Scanner Function Flatbed scanner Type Document glass/SPF/RSPF Scanning method Tri-color CCD light source (CCD: 3 components; R, G, and B) Light source Basic: 600 dpi x 1200 dpi Resolution* Setting range: 50dpi - 9600dpi Sheet media, books Original types Effective scanning 216 mm (8.5") (Lengthwise) x 356 mm (14") (Width) area...
  • Page 99 (19.6" (W) x 15.6" (D) x 3.5" (H)) Drawn from the machine Power supply As a part of our policy of continuous improvement, SHARP reserves Note the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.

  • Page 100: Software License

    SHARP’S Licensors and any other proprietary legends of SHARP and/or its Licensors that were on the original copy of the Software. You may also transfer all your license rights in the software, the backup copy of the Software, the related documentation and a copy of this License to another party, provided the other party reads and agrees to the terms and conditions of this License.
  • Page 101 Clause 6. A disk will be replaced when it is returned to SHARP or a SHARP authorized representative with a copy of the receipt. SHARP will have no responsibility to replace a disk damaged by accident, abuse or misapplication.

  • Page 102: Index

    INDEX Symbols Connecting the machine to your computer - Parallel cable....... 56 ] key......10, 27, 29, 32 - USB cable ........55 ] key ........... 10 Convenient copy functions ....26 ] key ........... 10 Conventions used in this manual and online manual ........
  • Page 103 Initial settings........12 Offset function during sort copy..30 Installation environment and usable Operation in copy, printer, and scanner software ..........37 modes..........60 Installing Acrobat Reader ....61 Operation panel......9, 10 Installing the software Optional equipment ......90 - Custom installation ......
  • Page 104 Ready indicator ....11, 12, 86 Toner cartridge ......9, 83 Reduction/enlargement/zoom ..25 Toner cartridge lock release lever ..84 Removing the software..... 78 Toner cartridge replacement .... 83 Reversing tray ......9, 82 Transfer charger......... 9 Roller rotating knob ......81 Tray location indicator ....

  • Page 105: Index By Purpose

    INDEX BY PURPOSE Preparations Connecting the computer Paper, loading Acrobat Reader, installing ....61 - Bypass tray........17 Basic procedure for printing ....58 - Paper tray........15 Button Manager, setting up Power, turn off ........13 - Windows 98/Me/2000....53 Power, turn on ........

  • Page 106: Material Safety Data Sheet

    Sharp Electronics of Canada Ltd. Telephone number for information : 905-890-2100 Emergency telephone number : 1-800-255-3924 Australia Sharp Corporation of Australia PTY. Ltd. Oceania No1 Huntingwood Drive Huntingwood Blacktown N.S.W. Telephone number for information : 1300-13-50-22 Germany Sharp Electronics (Europe) GMBH...
  • Page 107 MATERIAL SAFETY DATA SHEET Page: 2/4 Date Revised :Jan.10, 2003 Date Issued :Nov. 1. 2000 MSDS NO. F-01001 3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner.
  • Page 108 MATERIAL SAFETY DATA SHEET Page: 3/4 Date Revised :Jan.10, 2003 Date Issued :Nov. 1. 2000 MSDS NO. F-01001 Exposure Limit Values OSHA-PEL(USA) : 15mg/m (Total Dust), 5mg/m (Respirable Dust) ACGIH-TLV(USA) : 10mg/m (Total Dust), 3mg/m (Respirable Dust) Personal Protective Equipment Respiratory Protection : Not required under intended use.
  • Page 109 MATERIAL SAFETY DATA SHEET Page: 4/4 Date Revised :Jan.10, 2003 Date Issued :Nov. 1. 2000 MSDS NO. F-01001 Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m ) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m...
  • Page 110 Sharp Electronics of Canada Ltd. Telephone number for information : 905-890-2100 Emergency telephone number : 1-800-255-3924 Australia Sharp Corporation of Australia PTY. Ltd. Oceania No1 Huntingwood Drive Huntingwood Blacktown N.S.W. Telephone number for information : 1300-13-50-22 Germany Sharp Electronics (Europe) GMBH...
  • Page 111 MATERIAL SAFETY DATA SHEET Page: 2/4 Date Revised :Jul.31, 2002 Date Issued :Nov.1. 2000 MSDS NO. F-31001 4.FIRST-AID MEASURES Route(s) of Entry : Inhalation? Skin? Ingestion? Possible but very unusual. Inhalation : Remove to fresh air. If symptoms occur, consult medical personnel. Skin Contact : Wash with soap and water for 15 minutes or until particle is removed.
  • Page 112 MATERIAL SAFETY DATA SHEET Page: 3/4 Date Revised :Jul.31, 2002 Date Issued :Nov.1. 2000 MSDS NO. F-31001 9.PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical State : Solid Form : Powder Color : Black Odor : odorless : Not applicable : Not applicable Boiling / Melting Point : Not applicable Flash Point(°C)
  • Page 113 MATERIAL SAFETY DATA SHEET Page: 4/4 Date Revised :Jul.31, 2002 Date Issued :Nov.1. 2000 MSDS NO. F-31001 13.DISPOSAL CONSIDERATION Waste from Residues : Waste material may be dumped or incinerated under conditions which meet all federal, state and local environmental regulations. Contaminated Packaging : Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations.

  • Page 115: Luokan 1 Laserlaite

    VAROITUS! LAITTEEN KÄYTTÄMINEN Shielded cables must be used with this equipment to maintain compliance with MUULLA KUIN TÄSSÄ standards. KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. VARNING OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN UTSÄTTAS FÖR...
  • Page 116 PRINTED IN FRANCE TINSE1269TSZZ...

This manual is also suitable for:

Ar-m155

Table of Contents