Sharp AR-M455N Service Manual page 144

17
17-0
Purpose Clear/Cancel (Trouble etc.)
Function Used to cancel the PF troubles (when the copy
(Purpose) inhibit command from the host computer is
received).
Section Communication unit (TEL/LIU/MODEM etc.)
Item Trouble
Operation/Procedure
1) Select 1 (YES) with 10-key.
2) Press [START] key. (The trouble display is canceled.)
1 YES After canceling the PF trouble, the machine returns
to the main code entry standby mode.
2 NO Without canceling the trouble, the machine returns
to the main code entry standby mode.
SIMULATION 17
PF TROUBLE CANCELLATION.
ARE YOU SURE?
1. YES
2. NO
21
21-1
Purpose Setting
Function Used to set the maintenance cycle.
(Purpose)
Item Specifications
Operation/Procedure
1) Enter the number corresponding to the maintenance timing
display.
2) Press [START] key. The condition entered in procedure 1) is
set.
Maintenance timing display
0 Default (Differs depending on the model.)
1 - 200 Maintenance display at 1K - 200K
999 No maintenance display
SIMULATION 21-1
MAINTENANCE CYCLE SETUP. INPUT VALUE 0-999, AND PRESS
START.
0: DEFAULT
1-200: MAINTENANCE CYCLE (1K-200K)
999: FREE
22
22-1
Purpose
Function
(Purpose)
Item
Error
Operation/Procedure
Various print counter values are displayed.
TOTAL
DRUM
TONER
DEVE
MAINTENANCE
TOTAL OUTPUT
COPIES
PRINTER
1
FAX
I-FAX OUTPUT
DOC FILING OUTPUT
RIIGHT SIDE OUTPUT
OTHERS
SIMULATION 22-1
COUNTER DATA DISPLAY.
TOTAL: ********
DEVE: ********
TOTAL OUTPUT: ********
PRINTER: ********
I-FAX OUTPUT:********
RIGHT SIDE:********
Counter
22-2
Purpose
Function
Set range (Purpose)
0 - 999
Item
Operation/Procedure
The paper jam/trouble counter value is displayed.
PAPER JAM
SPF JAM
0
TROUBLE
SIMULATION 22-2
JAM/TROUBLE COUNTER DATA DISPLAY.
PAPER JAM: ********
TROUBLE: ********
AR-M355N/M455N SIMULATION 9 - 18
Adjustment/Setup/Operation data output/Check
(Display/Print)
Used to check the print count value in each
section and each operation mode. (Used to check
the maintenance timing.)
Counter
Total counter
Drum counter
Toner counter
Developer counter
Maintenance counter
Total output quantity
Copy effective paper counter
Printer counter
FAX print counter
iFAX print counter
Document filing print counter
Right paper exit counter
Other print counter (List print , etc.)
DRUM: ******** TONER: ********
MAINTENANCE: ********
COPIES: ********
FAX OUTPUT: ********
DOC FILING OUTPUT:********
OTHERS: ********
Adjustment/Setup/Operation data output/Check
(Display/Print)
Used to check the total numbers of misfeed and
troubles. (When the number of misfeed is
considerably great, it is judged as necessary for
repair. The misfeed rate is obtained by dividing
this count value with the total counter value.)
Trouble
Number of paper jams
Number of SPF jams
Number of troubles
SPF JAM: ********