Sharp AR-M455N Service Manual page 149

SIMULATION 22-13
PROCESS DATA DISPLAY.
DRUM: ********(counts)
TONER: ********(counts)
DEVE: *********(counts)
22-19
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function Used to check the values of the counters related
(Purpose) to the scan mode and the internet FAX mode.
Section Scanner
Item Counter
Operation/Procedure
The values of the counters related to the scan mode and the inter-
net FAX mode are displayed.
NETWORK SCANNER Document scan quantity (OC, SPF
ORIGINAL COUNTER total quantity)
MAIL COUNTER Number of times of mail send
FTP COUNTER Number of times of FTP send
INTERNET-FAX Document scan quantity (OC, SPF,
ORIGINAL COUNTER total quantity)
INTERNET-FAX SEND Number of times of internet FAX
send
INTERNET-FAX RECEIVE Number of times of internet FAX
receive
INTERNET-FAX OUTPUT Internet FAX print quantity
SCAN TO HDD Scan to HDD record quantity
INTERNET-FAX SEND IFAX send quantity counter
IMAGES
MAIL SEND IMAGES MAIL send quantity counter
FTP SEND IMAGES FTP send quantity counter
SIMULATION 22-19
NETWORK SCANNER AND INTERNET-FAX COUNTER DISPLAY.
NETWORK SCANNER ORIGINAL COUNTER: *********
MAIL COUNTER: ********
FTP COUNTER: ********
INTERNET-FAX ORIGINAL COUNTER: ********
INTERNET-FAX SEND: ********
INTERNET-FAX RECEIVE: ********
INTERNET-FAX OUTPUT: ********
SCAN TO HDD : ********
INTERNET-FAX SEND IMAGES: ********
MAIL SEND IMAGES: ********
FTP SEND IMAGES: ********
23
23-2
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function Used to check the trouble history of paper jam and
(Purpose) misfeed. (If the number of misfeed and troubles is
considerably great, it may be judged as necessary
to repair.)
Item Trouble
Operation/Procedure
1) Select "1. PRINT START."
2) Press [START] key.
The trouble history of paper jam and misfeed is printed.
This data can be cleared by SIM 24-1.
**********(sec.)
**********(sec.)
**********(sec.)
AR-M355N/M455N SIMULATION 9 - 23
SIMULATION 23-2
JAM/TROUBLE DATA PRINT MODE SELECT SETTING, AND
PRESS START.
0. TRAY SELECT AUTO ONLY
1. PRINT START
Press [START] key.
SIMULATION 23-2
JAM/TROUBLE DATA PRINT MODE.. EXECUTING ... .
0. TRAY SELECT :1
23-80
Purpose Operation test/Check
Function Used to check the operations of the sensors and
(Purpose) detectors in the paper feed and transport section.
Section Paper feed, paper transport
Item Operation
Operation/Procedure
1) Select "2. PRINT PATTERN."
2) Press [START] key.
3) Select "1" (Paper transport time data) with 10-key.
4) Press [START] key.
The list of the ON time of the sensors and the detectors of the
paper transport section is printed. When a paper jam or misfeed is
generated, the ON time of each sensor and detector is checked to
check if the operation of the sensor and the detector, paper feed,
and transport are normal or not.
0 TRAY SELECT AUTO
ONLY
1 PRINT START
2 PRINT PATTERN
SIMULATION 23-80
DATA PRINT MODE. SELECT SETTING, AND PRESS START.
0. TRAY SELECT :AUTO ONLY
1. PRINT START
2. PRINT PATTERN:1
Select 1 and
press [START] key.
SIMULATION 23-80
DATA PRINT MODE. EXECUTING ... .
0. TRAY SELECT :1
Select 2 and press [START] key.
SIMULATION 23-80
DATA PRINT MODE. INPUT VALUE, AND PRESS START.
(PRINT PATTERN)
INPUT 1.
1
Press [CUSTOM SETTINGS] key or
[START] key.
0
Auto only (No selection allowed)
Print execution
Print of the set data is executed.
Print pattern
1. Paper transport time data
1
Press [CUSTOM SETTING] key
or [START] key.
0
Press [CUSTOM SETTING] key
or [START] key.
1