U Npacking The Additional Paper Tray - Konica Minolta bizhub 43 Service Manual

• Take the duplex module out of its box.
• Remove the protective side sections.
• Remove the plastic bag from the module module.
2.2 U
NPACKING THE ADDITIONAL PAPER TRAY
• Take the additional tray out of its carton.
• Remove the protective side sections in the box.
• Remove the plastic bag from the additional tray.
• To install the additional tray, see the installation guide of the additional tray.
2.3 I
NSTALLING THE
• Install the dupex module.
• Stand in the rear at the terminal.
• Remove the rear cover of the printer after pushing the two tabs and the shutter of connector as
shown in the diagram.
• Take the duplex module.
- 5 -
T
ERMINAL
( )
OPTION
IG 3000361032 - 01