Konica Minolta bizhub 43 Service Manual page 100

2. DISASSEMBLY/ASSEMBLY DESCRIPTION
Remark(s): Before any disassembly or assembly operations, the machine must be switched off and
all leads on the back of the MFP must be disconnected (phone line, LAN and mains
leads). Remove the document trays and the paper feed tray.
2.1 L
IST OF TOOLS
• Torx hex screwdriver (Torx7)
• Torx hex screwdriver (Torx10)
• Torx hex screwdriver (Torx20)
• Torx hex screwdriver (Torx25)
• Flat screwdriver (medium size)
• Crosshead screwdriver
2.2 L
IST OF WORKSHEETS
• D1= Tray
• D2= Left front cover
• D3= Right front cover with keypad
• D4= Keypad assembly
• D5= Front panel assembly
• D6= USB front
• D7= PCB front panel
• D8= LCD screen
• D9= ADF scanner
• D10= Feeder roller module, back door, ADF and scanner covers
• D11= Input scanner, input paper assy and feeder shoe assy
• D12= ADF module unit, White frame plate, ADF feeder cover and ADF motor
• D13= Flatbed scanner
• D14= Flap scanner equipped, scanner upper assy, tension motor, CCD equipped with belt
• D15= PCB smart card
• D16= Accessibility to the electronic part
• D17= Second line modem
• D18= Power supply board
• D19= Hard disk
• D20= CPU board
• D21= Loudspeaker
• D22= LVPS
• D23= Front cover
• D24= Scanner tray
• D25= Interface
- 20 - MG 3000329394 - 03