At the end of the transfert, this window appears.
The software provides values in the 2nd column
• Click on Calculate for lines X FB and Y FB.
• If the new values agree, click Write to validate the proposed settings.
After writing, the new values are sent to the scanner and the new values appears in the first column.
Step 3 : If necessary you can change the ADF scan setting
• Click on ADF Scan.
• Install a Test chart type 1(253086400) on the ADF of the scanner.
• Confirm with OK.
The following windows Data transfer opens.
- 18 -
MG 3000329394 - 03