Related Manuals for Konica Minolta PC-401
Summary of Contents for Konica Minolta PC-401
- Page 1 INSTALLATION MANUAL PC-401 Paper Feed Cabinet for Product Code 4036 NOTES • Before installing, be sure to unplug the power cord of the machine. • Keep all packing materials out of the reach of children. 4348-7783-03 Printed in Japan...
- Page 2 PC-401 ■ Outline of Installation Procedures for 4036 System When installing the machine and associated options as a system, follow the order shown on the left. PC-101 PC-201 PC-401 DK-501 NOTE For the detailed installation procedures for each option, follow the instructions given in the corresponding Installation Manual and perform the procedures correctly.
- Page 3 PC-401 ■ Unpacking the Paper Feed Cabinet 2. Remove protective tape from the Paper Feed Cabinet. NOTE When removing the Paper Feed Cabinet from its shipping carton, do not hold onto the reinforcement bracket (indicated by the arrow in the illustration below) (as a personal injury or a deformed frame could result).
- Page 4 PC-401 ■ Attaching the machine to the Paper Feed Cabinet 5. Using the Fixing Brackets and Shoulder 1. Remove the Drawer Rear Cover from the Screws furnished with the Paper Feed machine (four screws). Cabinet, secure the machine to the Paper NOTE Feed Cabinet (at two places in the rear).
- Page 5 PC-401 ■ Installing the Fixing Leg and Fixing Leg covers 4. Install the Fixing Legs at two locations in the 1. Move the machine and Paper Feed Cabinet rear shown in the illustration (six screws to the installation site. Then, adjust the two ①...
-
Page 6: Loading Paper
PC-401 ■ Loading Paper ■ Making Settings for Paper Size 1. Plug the power cord into the power outlet 1. Display the Tech. Rep. Mode screen. and turn on the machine. (For details of how to display the Tech. Rep. - Page 7 PC-401 ■ Checking the Paper Reference Position 5. Measure width A from the edge of the paper 1. Touch “Machine Adjust.” to the pattern printed on the test print and check that it falls within the specified range. Specifications: 3.0 mm ± 1.0 mm Paper Exit •...
- Page 8 PC-401 ■ Installing the Ornamental Cover • If width A is greater than the specified value, 1. Press the Paper Descent button and then turn screw D counterclockwise. slide out the drawer from the Paper Feed Cabinet. 4348U010AA 4002U106AA 2. Install the Ornamental Cover attached to the machine (two screws).