Konica Minolta bizhub 43 Service Manual page 130

D14
OBJECT:F
- Unscrew the 5 torx 20 screws and remove the flat bed cover.
- Move out the flat bed from the machine.
- Cut the 2 grip rings
Mounting screw
- Unscrew the torx 10 screw.
Mounting screw
- Remove the two e-ring which maintain the 2 gears.
E-ring
- Move out all gears. Remove the CCD equipped with belt..
- To re-assembly motor assy on flat bed, you have to place new grip ring by using grip ring tool
(or equivalent).
- 50 -
LAP SCANNER EQUIPPED
, CCD
MOTOR EQUIPPED WITH BELT
, S
CANNER UPPER ASSY
MG 3000329394 - 03
, T
ENSION