Konica Minolta bizhub 43 Service Manual page 41

• Lift the flatbed scanner then open the trap door to access the toner cartridge.
• Unpack the new cartridge. Gently roll the cartridge 7 or 8 times to distribute the toner evenly
inside the cartridge. Thoroughly rolling the cartridge will assure the maximum copies per
cartridge.
• Hold the toner cartridge by its handle, place it on a flat surface and pull the seal out horizontally.
Remark(s): Make sure you remove the toner cartridge cover horizontally so as not to break it inside
the toner cartridge.After removing the cover, do not shake the toner cartridge. You may
risk spilling toner.
• Insert the cartridge in its slot by pushing it until it clicks (last move down) as shown on the
picture below.
- 7 - IG 3000361032 - 01