Konica Minolta bizhub 43 Service Manual page 159

1. PART LIST TABLES
1.1 T
ABLE COLUMNS
• ITEM NUMBER column: number of the item illustrated on the corresponding figure.
Note 1: An item number preceded by a hyphen "-" is a non-illustrated item.
Note 2: An item may be illustrated in a figure without being listed in the corresponding part list:
such an article cannot be replaced other than by replacing the subassembly of which it is part.
• REFERENCE column:SAGEMCOM part number.
• DESIGNATION column:description of the item.
• QTY column:quantity.
• R column:repairability.
The letter R indicates that an item is repairable in the workshop.
1.2 S
PARE PARTS ORDERING
When ordering spares parts, please state:
• the name of the equipment, its part number and its serial number (on manufacturer's nameplate).
• the designation of the part as given in the parts list.
Example: Right cover,
• the SAGEMCOM part number with the Prefix 9960P
Example: 9960P252272850
It is also recommended to state the reference of the document in which the part number has been found.
- 5 - NI/IPL 3000361031 - 01