Konica Minolta bizhub 43 Service Manual page 119

D10
OBJECT:F
• ADF motor cover
- Remove the Zen cube module if installed.
- Unscrew the screw holding the motor cover.
Motor cover
- Press simultaneously on the left and the right of the ADF motor cover and lift it.
- Remove the ADF motor cover.
• ADF left cover
- Unscrew the screw holding the side cover.
- Remove the side cover.
Side cover
• Back door
- To unclip the back door, insert the flat screwdriver in the slop.
- Remove the back door.
Back door
Assembly
• Replace the feeder roller module performing the opposite action to that used to remove it.
• Replace the back door performing the opposite action to that used to remove it.
• Replace the covers by performing the opposite action to that used to remove them.
- 39 -
EEDER ROLLER MODULE
(
COVERS CONTINUED
, B , ADF
ACK DOOR
)
MG 3000329394 - 03
AND SCANNER