Konica Minolta bizhub 43 Service Manual page 118

D9
OBJECT:F
Tools
• Torx hex screwdriver (Torx20)
Preliminary steps
• None.
Disassembly
• ADF cover
- Stand at the left-hand side of the terminal.
- Open the ADF cover.
- Move the arms A and B away from each other in the direction of the arrows shown on the
illustration below, and pull the cover backward at the same time.
ADF cover
A
• Feeder roller module
- Pull on the lock in the direction of the arrow shown on the illustration below.
- Remove in the same time the feeder roller module.
Feeder roller module
- 38 -
EEDER ROLLER MODULE
COVERS
, B , ADF
ACK DOOR
B
Lock
MG 3000329394 - 03
AND SCANNER