Konica Minolta bizhub 43 Service Manual page 131

- 51 - MG 3000329394 - 03
D14
OBJECT:F , S , T
LAP SCANNER EQUIPPED CANNER UPPER ASSY ENSION
, CCD
MOTOR EQUIPPED WITH BELT
Remark(s): Don't forget tune the tension of belt by unscrew and screwing the tension plate.
Assembly
• Replace the CCD equipped with belt by performing the opposite action to that used to remove
it and use new grip ring.
• Replace the CCD motor by performing the opposite action to that used to remove it.
• Replace the scanner upper assy by performing the opposite action to that used to remove it.
• Replace the flap scanner equipped by performing the opposite action to that used to remove it.