Konica Minolta bizhub 43 Service Manual page 84

1.1.3 CCD F
AND LATBED WINDOWS
• Set the on/off switch to "O" (off).
• Open the flatbed scanner cover.
• Wipe the scanner windows with a lint-free cloth moistened with isopropyl alcohol, or with
antistatic paper tissues as used for cleaning optical glass.
Recommended interval: to be defined depending on utilization. After cleaning, is advised to make a
local copy to check the cleanliness of the window.
1.1.4 C
ONTROL PANEL KEYS
1.1.4.1 Cleaning the control panel keys and LCD panel
• Set the on/off switch to "O" (off).
• Clean the top of the control panel, the LCD panel and the keys with a lint-free cloth moistened
with isopropyl alcohol or by means of a spray-on cleaning product. Let the product act for a
few moments before wiping it off.
Recommended interval: to be defined depending on utilization.
1.1.4.2 Cleaning the covers
It is advisable to clean all covers during a maintenance visit.
1.2 M
AINTENANCE
1.2.1 P
ERIODICAL MAINTENANCE
It is recommended to periodically perform the change of the following parts:
Part
Feeder roller module
Feeder shoe assy
Fuser assy (220V model)
Fuser assy (110V model)
Kit Roll assy
BTR assy
1.2.2 M
AINTENANCE IN WORKSHOP
• Material must be packed correctly in the original packing.
• The carton box must be fixed on the palett (torx n°20)
1.3 S
CANNING AND COMMUNICATION ERROR CODES
The communication error codes appear in the logs and in the transmission reports.
Following error codes are decimal.
1.3.1 G
ENERAL CODES
Code 01 - Engaged or no fax tone
This code appears after 6 failed attempts (Busy or no fax answer). You will have to restart the
transmission at a later time.
- 4 -
, LCD
PANEL AND COVERS
Module Periodical maintenance
Scanner
Scanner
Printer
Printer
Printer
Printer
50 000 pages
50 000 pages
200 000 pages
200 000 pages
200 000 pages
200 000 pages
MG 3000329394 - 03
Part number
253032840
253032796
186139224
186139211
186138777
186139232