Konica Minolta bizhub 43 Service Manual page 51

• Close the lid of the paper tray. Make sure that the lid of the tray is correctly closed.
• Replace the paper tray and push it completely into the terminal.
• Define the size and type of paper that are used on the terminal.
The terminal detect automaticaly the size of the standard paper. To check/define the size and
type of paper that are loaded, refer to the section Paper settings on the User guide.
3.3 A
DJUSTING THE ORIGINAL DOCUMENT OUTPUT TRAY
Depending on the format of the document to be scanned - A4 or LGAL (LEGAL) adjust the paper stop.
- 17 - IG 3000361032 - 01