Konica Minolta bizhub 43 Service Manual page 126

D12
OBJECT:ADF
• White frame plate
- Remove the ADF module.
B
White frame plate
A
- Apply a upward pressure on the white frame plate edge (A).
- Hold and extract the white frame plate edge (A).
- Extract the white frame plate.
Remark(s): Keep both springs in their locations.
- Unpack the white frame plate and inspect it visually.
- Replace the springs in their locations if necessary.
- Insert the short white frame plate edge (B) in its housing.
- Insert the other edge (A) in its housing applying a downward pressure on the white frame
plate.
Assembly
• Replace the ADF motor by performing the opposite action to that used to remove it.
• Replace the ADF feeder cover by performing the opposite action to that used to remove it.
• Replace the ADF module by performing the opposite action to that used to remove it.
- 46 -
MODULE UNIT
( )
CONTINUED
, ADF
FEEDER COVER AND
MG 3000329394 - 03
ADF
MOTOR